The Ford Barn

quickchange34 · 08-29-2021, 06:14 PM

I just started a rebuild on a 40-41 pickup cab . I had the cab and doors blasted . Going to make a shop truck. In the middle of the dash up at the top just down from the window moldings there is a stamped half moon opening for a ash tray . No it as not been cut in the dash it is stamped. The opening has 90 degree legs bent straight down . Anybody seen this ? I just dont have the ash tray. Thanks.

alanwoodieman · 08-29-2021, 06:32 PM

never seen anything like that and I have owned or own numerous 40/41 trucks any chance for a picture? I do have a 41 panel with a hole cut in the dash for a pull out ash tray

FHFD · 08-29-2021, 07:09 PM

I've had 8 of those p/u's, haven't seen what you are describing.,picture?

alanwoodieman · 08-29-2021, 09:57 PM

a couple of my 40/41 trucks dash. do you have a flat dash or one with a raised section and a ford script?

Tinker · 08-30-2021, 02:04 AM

The stamp dash ash tray was eliminated on the 39 trucks on. Easy way to spot a 39 truck front dash panel from a 38. Could always be exempts though.

mercman from oz · 08-30-2021, 04:29 AM

Sponsored Links (Register now to hide all advertisements)

That Ash Tray Photo added by "alanwoodieman" looks like the 1933/1934 Ford passenger car Ash tray?

cas3 · 08-30-2021, 10:25 AM

Thats what I was thinking too Trevor !

alanwoodieman · 08-30-2021, 11:21 AM

anybody want it? what do you have for a 40?

quickchange34 · 08-31-2021, 06:06 PM

alanwoodieman I have the raised dash with the ford script . It loos like the ashtray would have gone in the hole and had a flip top on it.

alanwoodieman · 08-31-2021, 07:24 PM

raised with script was a 40 year only truck dash

08-29-2021, 06:14 PM	#1
quickchange34 Senior Member Join Date: May 2010 Location: charlottesville, Va. Posts: 589	Ash tray 40-41 Pickup. I just started a rebuild on a 40-41 pickup cab . I had the cab and doors blasted . Going to make a shop truck. In the middle of the dash up at the top just down from the window moldings there is a stamped half moon opening for a ash tray . No it as not been cut in the dash it is stamped. The opening has 90 degree legs bent straight down . Anybody seen this ? I just dont have the ash tray. Thanks.

08-29-2021, 06:32 PM	#2
alanwoodieman Senior Member Join Date: May 2010 Location: upstate SC Posts: 2,963	Re: Ash tray 40-41 Pickup. never seen anything like that and I have owned or own numerous 40/41 trucks any chance for a picture? I do have a 41 panel with a hole cut in the dash for a pull out ash tray

08-29-2021, 07:09 PM	#3
FHFD Senior Member Join Date: Dec 2010 Location: Grays Harbor County, Wa Posts: 223	Re: Ash tray 40-41 Pickup. I've had 8 of those p/u's, haven't seen what you are describing.,picture? __________________ "Get your facts first..then you can distort them as you please"

08-30-2021, 02:04 AM	#5
Tinker Senior Member Join Date: May 2010 Location: MN Posts: 7,053	Re: Ash tray 40-41 Pickup. The stamp dash ash tray was eliminated on the 39 trucks on. Easy way to spot a 39 truck front dash panel from a 38. Could always be exempts though.

08-30-2021, 04:29 AM	#6
mercman from oz Senior Member Join Date: May 2012 Location: Queensland, Australia Posts: 10,368	Re: Ash tray 40-41 Pickup. Sponsored Links (Register now to hide all advertisements) That Ash Tray Photo added by "alanwoodieman" looks like the 1933/1934 Ford passenger car Ash tray?

08-30-2021, 10:25 AM	#7
cas3 Senior Member Join Date: Jan 2011 Location: sw minnesota Posts: 4,574	Re: Ash tray 40-41 Pickup. Thats what I was thinking too Trevor !

08-30-2021, 11:21 AM	#8
alanwoodieman Senior Member Join Date: May 2010 Location: upstate SC Posts: 2,963	Re: Ash tray 40-41 Pickup. anybody want it? what do you have for a 40?

08-31-2021, 06:06 PM	#9
quickchange34 Senior Member Join Date: May 2010 Location: charlottesville, Va. Posts: 589	Re: Ash tray 40-41 Pickup. alanwoodieman I have the raised dash with the ford script . It loos like the ashtray would have gone in the hole and had a flip top on it.

08-31-2021, 07:24 PM	#10
alanwoodieman Senior Member Join Date: May 2010 Location: upstate SC Posts: 2,963	Re: Ash tray 40-41 Pickup. raised with script was a 40 year only truck dash