|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-19-2019, 02:43 PM | #1 |
Senior Member
Join Date: Sep 2018
Location: Yorkville Indiana
Posts: 396
|
40 Sedan Toe Board
It’s my understanding that the toe boards was made out of wood, anyone reproducing them as a direct bolt in made of metal.
Dave Last edited by Branded; 02-19-2019 at 03:07 PM. |
02-19-2019, 02:51 PM | #2 |
Senior Member
Join Date: May 2015
Posts: 8,137
|
Re: 40 Sedan Toe Board
http://www.absolutesheetmetal.com/co...ford-car-parts
351077 $300 37-40 Ford Front Floor Kit Universal This Kit Will Fit a Stock Firewall or Can Be Trimmed to Fit One You Modified on All Passenger Vehicles From 1935-40
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
Sponsored Links (Register now to hide all advertisements) |
|
02-19-2019, 03:06 PM | #3 |
Senior Member
Join Date: Sep 2018
Location: Yorkville Indiana
Posts: 396
|
Re: 40 Sedan Toe Board
Thanks, I’m not after a complete floor pan just the toe boards. I’ve found them in wood but would like to have them in metal if they are available.
|
02-19-2019, 03:14 PM | #4 |
Senior Member
Join Date: May 2015
Posts: 8,137
|
Re: 40 Sedan Toe Board
I'm sure that Absolute Sheet Metal would sell you the metal toe boards separately. Call them at 928-420-1254....
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
02-19-2019, 03:23 PM | #5 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,942
|
Re: 40 Sedan Toe Board
Not trying to discourage you but,you will find that wood is much better. Easy to remove and install and quieter. You can make the wood super smooth like metal if you use sandable primer with acrylic enamel finish.
Last edited by 19Fordy; 02-19-2019 at 03:29 PM. |
02-19-2019, 03:30 PM | #6 |
Senior Member
Join Date: Sep 2018
Location: Yorkville Indiana
Posts: 396
|
Re: 40 Sedan Toe Board
|
02-19-2019, 06:03 PM | #7 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,942
|
Re: 40 Sedan Toe Board
No doubt about it. I made my toe boards out of plywood (good 2 sides) 30 years ago with no regrets. Fill in any imperfections with Bondo and sand it nice and smooth. Primer and cover with high quality enamel. Mine are like glass.
|
02-19-2019, 07:28 PM | #8 |
Senior Member
Join Date: May 2010
Posts: 2,871
|
Re: 40 Sedan Toe Board
Another option is Starboard, which is used in the marine industry to replace wood. It machines even better than wood, and is bullet proof. Comes in different colors and thicknesses. The toe boards in my '40 coupe are original and in excellent condition, so that's a pretty good testimony to wood.
|
02-20-2019, 09:07 AM | #9 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,942
|
Re: 40 Sedan Toe Board
Starboard is excellent but expensive, so don't make any mistakes. However, you are still better off with wood.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|