|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-24-2020, 08:58 AM | #1 |
Junior Member
Join Date: Oct 2016
Posts: 14
|
32-48 Axle housings
I have set of axle housings( pretty sure they are 40's ) measure 25.5" from outer edge of housing to edge of flange that backing plate bolts to. I have another set (don't know year ) measures 24.75. Can someone tell me what year this set might be? Thank you. roger miller
|
05-24-2020, 09:16 AM | #2 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,062
|
Re: 32-48 Axle housings
Post some pictures - folks can easily tell by the spring hangers.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-24-2020, 09:33 AM | #3 |
Senior Member
Join Date: May 2010
Location: Northern Neck, VA
Posts: 131
|
Re: 32-48 Axle housings
The longer ones are likely '42 - '48. The hangers are different from year to year, so pictures will help.
|
05-24-2020, 09:33 AM | #4 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 32-48 Axle housings
This article has been posted before, but might help you. There was a link posted recently to higher quality scans, but I don't have it.
|
05-24-2020, 11:52 AM | #5 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,635
|
Re: 32-48 Axle housings
__________________
Alan |
05-24-2020, 05:42 PM | #6 | |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 32-48 Axle housings
Sponsored Links (Register now to hide all advertisements)
Quote:
|
|
05-25-2020, 09:07 AM | #7 |
Junior Member
Join Date: Oct 2016
Posts: 14
|
Re: 32-48 Axle housings
Thanks to all who replied. I am sure the longer ones are 37-41 as spring hangers are still on. The shorter ones have the spring hanger cut off and just trying to find out what year they were as per measured length. Thanks again.
|
05-25-2020, 11:54 AM | #8 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 32-48 Axle housings
Subtract out the width of the center section and divide by 2. Now you just need the width of the center section, which I would have to measure.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|