|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-06-2020, 02:58 PM | #1 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Rear shackel/shock link ball to backing plate clearance
I am curious as to the clearance of the rear shackle/shock link ball assembly on the right and left axle halves, to the attached rear backing plate.
On the Left side I have 0.165 clearance...On the Right side I have 0.035 clearance. If any of you have a chassis with a rear end attached and no body on the frame, could you please check to see what your distance is in that area? At this time, I have no idea as to why the difference. Backing plates are stright, no bends in the shackle/shock link ball attachment. Hmmmmm. Thanks, Pluck Last edited by Steve Plucker; 09-06-2020 at 03:15 PM. |
09-06-2020, 06:11 PM | #2 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: Rear shackel/shock link ball to backing plate clearance
Sponsored Links (Register now to hide all advertisements)
Last edited by jw hash; 09-06-2020 at 06:30 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|