|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-22-2018, 06:21 PM | #1 |
Junior Member
Join Date: Dec 2017
Posts: 14
|
29 Model A Pickup Headlight Conduit Install?
Hello all!
Installing the conduit on the headlights through the holes on the side of the radiator seems pretty simple doesn't it? That is what I thought as well until it came time to actually install them. I ordered the following parts from Macs https://www.macsautoparts.com/ford_m...-diameter.html We also have the radiator here...https://www.macsautoparts.com/ford_m...ce-import.html The holes where the wiring goes through and the conduit are approximately 1/16th too small for the Ferrules to pass through. In fact, I have tried looking up videos for this super simple task or pictures on how to properly put these on and have had no luck. Would anyone be able to spread some knowledge my way to figure this out? Thank you! |
05-22-2018, 08:42 PM | #2 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: 29 Model A Pickup Headlight Conduit Install?
Sponsored Links (Register now to hide all advertisements)
|
Sponsored Links (Register now to hide all advertisements) |
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|