04-20-2011, 09:39 AM | #1 |
Senior Member
Join Date: May 2010
Location: Upstate SC
Posts: 252
|
Speedo Turtle.
is my "turtle" cover backwards? does it matter? 32 banjo..
Thanks.. |
04-20-2011, 09:42 AM | #2 |
BANNED
Join Date: May 2010
Location: stratford,ct
Posts: 5,971
|
Re: Speedo Turtle.
You cant see the turtle how are we supposed to tell if its backwards?? ken ct Bad pic.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-20-2011, 09:50 AM | #3 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,306
|
Re: Speedo Turtle.
You have it wrong.Its supposed to go pointing to the pass side.
|
04-20-2011, 09:52 AM | #4 |
Senior Member
Join Date: May 2010
Location: Upstate SC
Posts: 252
|
Re: Speedo Turtle.
Can you see the speedo cable? It can only point one way or the other..
I am wondering if its pointed the wrong way.. I saw another early framed car the other day and the cable went towards the passenger side or does it matter? |
04-20-2011, 10:01 AM | #5 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,306
|
Re: Speedo Turtle.
Here is a pic from The 32 Ford Book.Yes I can see your cable.The cable on an orig car does not go up the left side.It goes thru on the pass side,then thru the firewall (right side)to speedo.
|
04-20-2011, 10:04 AM | #6 |
Senior Member
Join Date: May 2010
Location: Upstate SC
Posts: 252
|
Re: Speedo Turtle.
Sponsored Links (Register now to hide all advertisements)
|
04-20-2011, 10:26 AM | #7 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,306
|
Re: Speedo Turtle.
If you greased it before it should be fine.
|
04-20-2011, 06:22 PM | #8 |
Senior Member
Join Date: May 2010
Location: Edinburgh, Scotland
Posts: 125
|
Re: Speedo Turtle.
I think odometer will read backwards that way.
|
04-20-2011, 06:45 PM | #9 |
Senior Member
Join Date: May 2010
Location: Upstate SC
Posts: 252
|
Re: Speedo Turtle.
thanks guys...
|
04-20-2011, 07:28 PM | #10 |
Senior Member
Join Date: May 2010
Location: Sinclairville NY
Posts: 230
|
Re: Speedo Turtle.
Did you shorten or cut the tube for any reason? There is one hole that drains the gear oil back into the reared. Need to make sure the passage hole in the tube flange is in the bottom to match the passage in the banjo casting. Had pictures once, otherwise clear as mud?
|
04-20-2011, 08:03 PM | #11 |
Senior Member
Join Date: May 2010
Location: Upstate SC
Posts: 252
|
Re: Speedo Turtle.
I didn't, hard to tell what was done prior... Thanks again fellas
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|