Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-11-2015, 11:48 AM   #1
Spokes
Senior Member
 
Join Date: Feb 2013
Location: Monterey Peninsula,California
Posts: 194
Default Heating Painted parts in Oven

Hi Fellow Barners. I am rebuilding brakes on my A. I have seen posts where Barners have put small parts in their Wife's Oven when She is Not Home. Does it work ? what temp ? and for How Long. Thank you Spokes
Spokes is offline   Reply With Quote
Old 09-11-2015, 12:16 PM   #2
Vin-tin
Senior Member
 
Vin-tin's Avatar
 
Join Date: Aug 2012
Location: Eastern Pa.
Posts: 543
Default Re: Heating Painted parts in Oven

Quote:
Originally Posted by Spokes View Post
Hi Fellow Barners. I am rebuilding brakes on my A. I have seen posts where Barners have put small parts in their Wife's Oven when She is Not Home. Does it work ? what temp ? and for How Long. Thank you Spokes
That depends if she catches you, or not. (sorry, I just had to say that)
Someone will come along shortly and give you a serious answer.
__________________
1929 Coupe
1930 Coupe
1935 Ford 5 window coupe
Vin-tin is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-11-2015, 12:28 PM   #3
Tiny
Senior Member
 
Tiny's Avatar
 
Join Date: May 2010
Location: Redding Cal
Posts: 1,388
Default Re: Heating Painted parts in Oven

Yes it works with enamel. Lowest setting on the oven for a few hours.
Yes don't let the wife catch you My mom was patient with this practice my wife not so much!!
__________________
Blackwall Panthers
Nor Cal chapter
Tiny is offline   Reply With Quote
Old 09-11-2015, 12:35 PM   #4
Big hammer
Senior Member
 
Join Date: Jun 2014
Location: Land of Lincoln
Posts: 3,131
Default Re: Heating Painted parts in Oven

Couple of hours in the sun, cheaper and happy wife :-)
Big hammer is offline   Reply With Quote
Old 09-11-2015, 01:07 PM   #5
Fullraceflathead
Senior Member
 
Fullraceflathead's Avatar
 
Join Date: May 2012
Location: Chillicothe, Missouri
Posts: 1,175
Default Re: Heating Painted parts in Oven

I do it often on spray painted parts spayed from a spray can. I'll put them in at 200 degrees 30 minutes minimum.
Sent the little woman off to a shoe sale and she'll never know!
The nice thing about drying paint in your oven is you wont get small Gnats and other flying bugs in your fresh uncured paint like you might drying outside.
__________________
"If I asked people what they wanted they would have said faster horses."
-Henry Ford

"Primitive technology is not a design flaw"


1928 Ford Model A Roadster Pickup
1930 Gordon Smith Air Compressor
1941 Willy's Pickup
1960 Thunderbird-For Sale
1964 Buick Riviera 2x4 425
1965 Pontiac GTO, 455 Super Duty
2004 Dodge Ram SRT-10, V-10 Viper
1977 Charger Jet Boat,460 Ford,Jacuzzi Jet
Front Engine Nostalgia Dragster,Supercharged 296 "Fullrace Flathead" Ford
Engine Build up on DVD ask
Fullraceflathead is offline   Reply With Quote
Old 09-11-2015, 01:53 PM   #6
harleytoprock
Senior Member
 
Join Date: Aug 2014
Posts: 438
Default Re: Heating Painted parts in Oven

Sponsored Links (Register now to hide all advertisements)
I hope you have a good exhaust fan. The stink in the kitchen will give it away to the wife.
harleytoprock is offline   Reply With Quote
Old 09-11-2015, 02:25 PM   #7
700rpm
Senior Member
 
700rpm's Avatar
 
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,903
Default Re: Heating Painted parts in Oven

Buy a small toaster oven and use it in your shop. Wife happy.
__________________
Ray Horton, Portland, OR


As you go through life, keep your eye on the donut, not the hole.
700rpm is offline   Reply With Quote
Old 09-11-2015, 03:22 PM   #8
C26Pinelake
BANNED
 
Join Date: May 2010
Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto.
Posts: 5,800
Default Re: Heating Painted parts in Oven

Used stoves and exhaust fans are very cheap! Buy one for the garage or shed ( I did ) for this type of work. Wayne
P.s. Who knows when you might move out there once she finds all the Model A receipts!
C26Pinelake is offline   Reply With Quote
Old 09-12-2015, 12:59 AM   #9
40 Deluxe
Senior Member
 
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,779
Default Re: Heating Painted parts in Oven

Should be a lot of give away electric stoves around and heating elements are cheap. Put a piece of sheet steel or plywood on top and you have more bench space with storage in oven between paint baking events.
40 Deluxe is offline   Reply With Quote
Old 09-12-2015, 01:05 AM   #10
Allanw
Senior Member
 
Allanw's Avatar
 
Join Date: Oct 2012
Location: Whangarei, New Zealand
Posts: 298
Default Re: Heating Painted parts in Oven

It works great...

Also, the dishwasher is a fantastic parts washer, and the sink in our skullery is 20" X 32".

I'm not joking... my Wife just rolls her eyes now :-D
__________________
Allan
'29 Tudor, Canadian RHD
Whangarei, NZ
"Duct Tape can't fix stupid, but it can MUFFLE the sound"
Allanw is offline   Reply With Quote
Old 09-12-2015, 07:12 AM   #11
jimalabam
Senior Member
 
jimalabam's Avatar
 
Join Date: May 2010
Location: Lee County Alabama
Posts: 828
Default Re: Heating Painted parts in Oven

As said, yes low temp for several hours = good job, BUT don't do what I did. forgot it overnight, wife wakes me up, "what is that smell, I think the house is on fire", I spring out of bed, find my gloves I had hidden in the kitchen pantry, and was caught red handed holding an exhaust manifold. No explanation will be good enough. Years later, she came into the garage and wondered what I did with that nice oven. Nuff said...
jimalabam is offline   Reply With Quote
Old 09-12-2015, 08:20 AM   #12
mcorrell
Senior Member
 
mcorrell's Avatar
 
Join Date: Aug 2014
Location: Canotn, NC
Posts: 163
Default Re: Heating Painted parts in Oven

I have used my gas grille to cure VHT high temp paint. It worked great and didn't stink up the house.
__________________
1929 (early) Model A Special Coupe - restored to original

1964 Buick Wildcat convertible
mcorrell is offline   Reply With Quote
Old 09-12-2015, 09:52 AM   #13
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 6,340
Default Re: Heating Painted parts in Oven

Drying in my gas oven didn't stinking up the house. Don't know about electric, could be the flames burn the fumes before they escape the oven. Oh, still run the exhaust vent.
redmodelt is offline   Reply With Quote
Old 09-12-2015, 10:07 AM   #14
1stGrumpy
Senior Member
 
1stGrumpy's Avatar
 
Join Date: May 2010
Location: Clarksville, Arkansas
Posts: 643
Default Re: Heating Painted parts in Oven

When we remodeled the kitchen, I put the old electric stove/oven out in my shop. I took the top off and just use the oven for powder coating and other heating jobs, warms the shop up in the winter too! It's large enough that I can get a 17" wheel in it! Another thing to consider, besides the smell, what toxic gases are being emitted when it's heating those painted parts? There's a reason that the powder coating suppliers warn not to use an oven that you cook food in!
1stGrumpy is offline   Reply With Quote
Old 09-12-2015, 04:17 PM   #15
jrelliott
Senior Member
 
jrelliott's Avatar
 
Join Date: May 2010
Location: Pine, AZ
Posts: 794
Default Re: Heating Painted parts in Oven

Phoenix in the summer, parts out in the sun. Does not make the wife mad and no toxic fumes in the oven. Currently 105 degrees in Phoenix in the shade.
jrelliott is offline   Reply With Quote
Old 09-12-2015, 04:35 PM   #16
Mitch//pa
BANNED
 
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
Default Re: Heating Painted parts in Oven

here is what happens when you get caught using the oven.
Attached Images
File Type: jpg image.jpg (22.9 KB, 9 views)
Mitch//pa is offline   Reply With Quote
Old 09-12-2015, 05:06 PM   #17
700rpm
Senior Member
 
700rpm's Avatar
 
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,903
Default Re: Heating Painted parts in Oven

Quote:
Originally Posted by Mitch//pa View Post
here is what happens when you get caught using the oven.
Izzat you, Mitch?
__________________
Ray Horton, Portland, OR


As you go through life, keep your eye on the donut, not the hole.
700rpm is offline   Reply With Quote
Old 09-14-2015, 01:06 PM   #18
Bruce Lancaster
Member Emeritus
 
Join Date: May 2010
Location: Madison, NJ
Posts: 5,230
Default Re: Heating Painted parts in Oven

For small stuff, I just balance parts on a horizontal portion of the exhaust pipe from our water heater...as noted above, bright sunshine is sufficient to get some hardening. I'm about to build a simple heater for the workbench for the small stuff, essentially a pie pan above a lamp with a 100 watt bulb.
I don't dare go near the oven...wife is a lawyer.
Bruce Lancaster is offline   Reply With Quote
Old 09-14-2015, 02:13 PM   #19
George Miller
Senior Member
 
George Miller's Avatar
 
Join Date: May 2010
Location: NC
Posts: 2,975
Default Re: Heating Painted parts in Oven

Quote:
Originally Posted by Mitch//pa View Post
here is what happens when you get caught using the oven.
Was you using Bills oven.
George Miller is offline   Reply With Quote
Old 09-14-2015, 02:20 PM   #20
CarlG
Senior Member
 
CarlG's Avatar
 
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,115
Default Re: Heating Painted parts in Oven

My wife stores her teaching & quilting materials in the garage.
I store my freshly painted parts in the kitchen oven.

She is still ahead on that trade!
__________________
Alaskan A's
Antique Auto Mushers of Alaska
Model A Ford Club of America
Model A Restorers Club
Antique Automobile Club of America
Mullins Owner's Club
CarlG is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:05 PM.