Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-15-2018, 05:45 PM   #21
daren007
Senior Member
 
Join Date: Apr 2015
Location: Saint Cloud Mn
Posts: 284
Default Re: Float A motor and noise

Update. Removed engine pans no difference. Removed the front mount lower rubber bushing (I have a shock bushing in place of the spring and washer) and lifted the front of the engine with a hydraulic jack on the stud just enough to prevent metal to metal contact between the mount and cross member. No change. Loosened the rear float a motor mounts and jacked the back of the engine with a jack under the transmission. The unpleasant drone type noise all but disappeared. There are no parts contact between the engine and chassis ie brake cross shaft etc. If someone has a magic bullet to stop the noise I would really really like to know what it is. All I want is to stop the vibration from transmitting the noise into the cabin.
daren007 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:29 PM.