|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-26-2019, 01:32 PM | #1 |
Senior Member
Join Date: Jul 2010
Location: upstate NY near Mass border
Posts: 789
|
Indian head shellac
I have been following tom mendy's tutorial on rebuilding my differential. He says he prefers indian head shellac for the gaskets on the pumpkin. In the hardware store they have two different kinds of shellac but neither is indian head. Is there a difference or is shellac shellac, regardless of the brand name?? If they are different then what is special about indian head?? Jack
|
05-26-2019, 01:47 PM | #2 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: Indian head shellac
Napa has it. But Lets back up. are you setting up your preload with gaskets ( shims ) ? where are you using the shellac. ? the only place the shellac would by good for is the torque tube. Ford never used a gasket there .
|
Sponsored Links (Register now to hide all advertisements) |
|
05-26-2019, 01:53 PM | #3 |
Senior Member
|
Re: Indian head shellac
Don't believe there is much dfference. Most all comes from India and is made from the female lac bug.
|
05-26-2019, 03:24 PM | #4 |
Senior Member
Join Date: Jul 2010
Location: upstate NY near Mass border
Posts: 789
|
Re: Indian head shellac
jw hash; I am setting up my preload with gaskets as Tom suggests. So far so good and when I am satisfied with the results, I will take it apart and use the shellac to seal the pumpkin with the gaskets in place. Jack
|
05-26-2019, 03:44 PM | #5 |
Senior Member
Join Date: May 2010
Location: Windy City
Posts: 2,919
|
Re: Indian head shellac
Many auto parts stores have it. Fooles in the hardware store may have it confused with amber and clear shellac in the paint department. |
05-26-2019, 04:58 PM | #6 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,390
|
Re: Indian head shellac
Sponsored Links (Register now to hide all advertisements)
Paul in CT |
05-26-2019, 05:18 PM | #7 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
|
Re: Indian head shellac
Since the gaskets are also shims, any further thickness can have an affect. The Tech sheet for that stuff is around .010" for a thin coat. On a stack of gaskets, it will add up. It also dries hard. https://441py33rout1ptjxn2lupv31-wpe.../tds/20539.pdf
Some folks apply a thin coat of Lubriplate grease and some use nothing at all but make sure you still have the correct bearing preload no matter what you use. Loose side bearings wouldn't last well. |
05-27-2019, 05:17 PM | #8 |
Senior Member
Join Date: May 2010
Location: 60615,330th Ave.,Clare, Iowa, 50524
Posts: 1,457
|
Re: Indian head shellac
We have used Indian Head on all gaskets for 55 years, and my father be for me.
If you don't want something to leak, use it. As far as it getting hard, I find that not the case for me. The real best on Ford head gaskets. It has a little round dauber, that spreads the cement, way better then then some that have a cheap little junkie brush. I never did like the saying about other brands, Just As Good As! Herm. |
05-27-2019, 10:09 PM | #9 |
Senior Member
Join Date: May 2010
Location: The sticks of east Texas
Posts: 474
|
Re: Indian head shellac
AKA "Indian Snot". (Thank you, Ken Parker!)
|
05-28-2019, 08:39 AM | #10 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
|
Re: Indian head shellac
I use mostly modern sealants in aviation business. 1211 by Threebond is what I use most but there are also some good uses for Loctite 515 anaerobic sealant. That stuff will seal turbine oil inside a gear case that has no gasket at all but I do use a #50 silk thread on the parting surface just like on an aircraft engine case. Some of this new stuff is a lot better than all that old crap.
|
05-28-2019, 08:48 AM | #11 | |
BANNED
Join Date: Apr 2017
Location: Sacramento
Posts: 1,262
|
Re: Indian head shellac
Quote:
I use the modern stuff in the heavy equipment trade and feel the same way..modern sealants are a godsend with old technology. |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|