|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-27-2017, 08:21 AM | #1 |
Member
Join Date: Dec 2015
Location: Ontario, Canada
Posts: 55
|
Carb gasket wicking gas
I recently had my Holley 94 double barrel carb rebuilt. Seems to be working fine. I have noticed that the upper gasket is damp with gas, more toward the front above the bowl than the rear of the carb. I have made sure that the bolts are tight. Anyone seen this? Is the a fix? The shop that did the rebuild has been doing these carbs for years. I will be in touch with them. Anyone want to weigh in.
|
01-27-2017, 08:31 AM | #2 |
Senior Member
Join Date: May 2010
Location: Lehighton Pa
Posts: 1,085
|
Re: Carb gasket wicking gas
Float setting may be a bit high.
|
Sponsored Links (Register now to hide all advertisements) |
|
01-27-2017, 08:44 AM | #3 |
Senior Member
Join Date: Dec 2014
Location: Miami Oklahoma
Posts: 535
|
Re: Carb gasket wicking gas
Could be the top was not tightened evenly at some point in time warping the top.
__________________
Tommy |
01-27-2017, 09:41 AM | #4 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,942
|
Re: Carb gasket wicking gas
After you find out why you have such an abundance of gasolene, apply a thin layer of this to both sides of your gasket. Buy the tube.
http://www.aircraftspruce.com/catalo...ezturnlube.php |
01-27-2017, 10:01 AM | #5 |
Senior Member
Join Date: May 2010
Location: Illinois
Posts: 2,184
|
Re: Carb gasket wicking gas
Sponsored Links (Register now to hide all advertisements)
John |
|
|
Sponsored Links (Register now to hide all advertisements) |
|