The Ford Barn

luvmyclassics · 02-17-2017, 11:53 AM

Is there a 12v temperature sending unit that will work on a 51 ford f1 cylinder head or do I need to do a voltage drop?

TJ · 02-17-2017, 01:05 PM

The volt drop would be used on the gauge and not the sender. If you are running stock gauges just use the stock sender and put the volt drop to the gauges.

Flat Ernie · 02-23-2017, 08:02 AM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by TJ

The volt drop would be used on the gauge and not the sender. If you are running stock gauges just use the stock sender and put the volt drop to the gauges.

This is the simplest way forward.

02-17-2017, 11:53 AM	#1
luvmyclassics Senior Member Join Date: Jan 2011 Location: The Villages, FL Posts: 193	12v temperature sending unit Is there a 12v temperature sending unit that will work on a 51 ford f1 cylinder head or do I need to do a voltage drop?

02-17-2017, 01:05 PM	#2
TJ Senior Member Join Date: May 2010 Location: Napa,California Posts: 6,035	Re: 12v temperature sending unit The volt drop would be used on the gauge and not the sender. If you are running stock gauges just use the stock sender and put the volt drop to the gauges.