The Ford Barn

RockHillWill · 06-29-2012, 10:09 AM

Most of you that know me know that I like to hang around some of the sheet metal forums and I have learned a lot from those folks. Several of them have asked me to post info after I got back from the meets and I have done so.

Here is a link to the post that I made:
http://allmetalshaping.com/showthread.php?t=6434

If the doesn't get you thru to the site, here is a link directly to the album that I made there.
http://allmetalshaping.com/album.php?albumid=98

It is more about sheet metal on the Panel Delivery than the actual restoration work, but some might find it interesting.

Tom from Drippin' · 06-29-2012, 01:50 PM

The site asks for user name & password?????????????

Mike V. Florida · 06-29-2012, 02:58 PM

Same here the album requires that we join the Forum to see the pics.

CarlG · 06-29-2012, 05:06 PM

The link to the post with pictures works OK, it's just the album that requires name and password.

Aerocraft · 06-29-2012, 05:20 PM

Great job with the marvelous work. I saw it at OSH and was very impressed. Now, the big question is what is next? Gar Williams

RockHillWill · 06-29-2012, 10:26 PM

Sponsored Links (Register now to hide all advertisements)

Sorry about the problem with the links. My password is saved on my cmputer, so it worked when I tested it.

Here is a link to my webpage that has been updated often since I started this project. I am adding more daily as I go back and gather photos from the last several months. I have not done much updating for a while, but am doing so now since the project is completed.

http://www.mantiquesresto.com/Projec...PD/dfpd01.html

Click on the 'red' colored box at the top of the page to access the restoration section.

If you click on the colored 'boxes' on some of the later pages, it will go to a more detailed page.

06-29-2012, 10:09 AM	#1
RockHillWill Senior Member Join Date: May 2010 Location: Rock Hill, S.C. Posts: 985	Panel Delivery Post on Metal Shaping Site Most of you that know me know that I like to hang around some of the sheet metal forums and I have learned a lot from those folks. Several of them have asked me to post info after I got back from the meets and I have done so. Here is a link to the post that I made: http://allmetalshaping.com/showthread.php?t=6434 If the doesn't get you thru to the site, here is a link directly to the album that I made there. http://allmetalshaping.com/album.php?albumid=98 It is more about sheet metal on the Panel Delivery than the actual restoration work, but some might find it interesting. __________________ Uncle Bud says "too soon old, too late smart!"

06-29-2012, 01:50 PM	#2
Tom from Drippin' Senior Member Join Date: May 2010 Location: Dripping Springs, Texas Posts: 286	Re: Panel Delivery Post on Metal Shaping Site The site asks for user name & password????????????? __________________ The pursuit of excellence is healthy and rewarding. The pursuit of perfection is frustrating, neurotic and a terrible waste of time.

06-29-2012, 02:58 PM	#3
Mike V. Florida Senior Member Join Date: May 2010 Location: South Florida Posts: 14,054	Re: Panel Delivery Post on Metal Shaping Site Same here the album requires that we join the Forum to see the pics. __________________ What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II

06-29-2012, 05:06 PM	#4
CarlG Senior Member Join Date: Nov 2010 Location: Anchorage, Alaska Posts: 9,115	Re: Panel Delivery Post on Metal Shaping Site The link to the post with pictures works OK, it's just the album that requires name and password.

06-29-2012, 05:20 PM	#5
Aerocraft Senior Member Join Date: May 2010 Location: Naperville, IL Posts: 1,387	Re: Panel Delivery Post on Metal Shaping Site Great job with the marvelous work. I saw it at OSH and was very impressed. Now, the big question is what is next? Gar Williams

06-29-2012, 10:26 PM	#6
RockHillWill Senior Member Join Date: May 2010 Location: Rock Hill, S.C. Posts: 985	Re: Panel Delivery Post on Metal Shaping Site Sponsored Links (Register now to hide all advertisements) Sorry about the problem with the links. My password is saved on my cmputer, so it worked when I tested it. Here is a link to my webpage that has been updated often since I started this project. I am adding more daily as I go back and gather photos from the last several months. I have not done much updating for a while, but am doing so now since the project is completed. http://www.mantiquesresto.com/Projec...PD/dfpd01.html Click on the 'red' colored box at the top of the page to access the restoration section. If you click on the colored 'boxes' on some of the later pages, it will go to a more detailed page. __________________ Uncle Bud says "too soon old, too late smart!"