|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-17-2020, 09:31 AM | #21 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,312
|
Re: Reusing head bolts.
Boy, I don't know; a head bolt with a 5/8" hex is just wrong in my book!
|
03-01-2020, 04:13 PM | #22 |
Senior Member
Join Date: Oct 2019
Location: Niagara Falls Canada
Posts: 117
|
Re: Reusing head bolts.
I found that the torsion value of some of the bolts was exceeded when trying to REMOVE
the bolts from the heads, so even though they weren't stretched I replaced them with Grade 8 zinc dichromate bolts which are much stronger but have a slightly smaller head, so you will have to glue chrome nut covers on if you use them. Also use hardened S.A.E flat washers under them. |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|