|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
03-23-2020, 09:14 PM
|
#1 |
|
Junior Member
Join Date: Mar 2020
Posts: 26
|
Replacing rear qtr window
What is best to use to reset glass in Rear quarter window frame to seal it? It appeared to be some sort of rubberized window channel in the original.
|
|
|
|
03-23-2020, 09:46 PM
|
#2 |
|
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,919
|
Re: Replacing rear qtr window
What make and model of vehicle?
|
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
03-24-2020, 01:23 AM
|
#3 |
|
Senior Member
Join Date: May 2012
Location: u-rah-rah-Wisconsin
Posts: 1,136
|
Re: Replacing rear qtr window
Likely is glass setting tape.
__________________
19 and 49 F1 - jes' like Henry II built 1946 Deluxe - as Henry built it |
|
|
|
|
03-24-2020, 07:36 AM
|
#4 |
|
Junior Member
Join Date: Mar 2020
Posts: 26
|
Re: Replacing rear qtr window
1939 Ford Deluxe Fordor
|
|
|
|
|
03-24-2020, 08:33 AM
|
#5 |
|
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,919
|
Re: Replacing rear qtr window
Here's what you need.This is the rear 1/4 window of a 40 Ford coupe. Call Drake and see if he now has it in stock. Also, check with other vendors below. Don't know if Carpenter has it. I also used the sealant shown, although some say it's not required. That was in 1988. Still holding.
https://www.bobdrake.com/FordItem.aspx?Item=B-704220-B A SEARCH revealed this helpful information about the seals. https://www.fordbarn.com/forum/searc...rchid=15011464 and https://www.fordbarn.com/forum/showt...window+sealant and https://www.fordbarn.com/forum/searc...rchid=15011478 Check with C and G. https://cgfordparts.com/ufolder/cgca...&searchnumber= Last edited by 19Fordy; 03-24-2020 at 08:51 AM. |
|
|
|
|
03-24-2020, 08:51 AM
|
#6 |
|
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,301
|
Re: Replacing rear qtr window
Sponsored Links (Register now to hide all advertisements)
|
|
|
|
|
03-24-2020, 11:23 AM
|
#7 |
|
Senior Member
Join Date: Jul 2012
Location: Bellingham, WA
Posts: 213
|
Re: Replacing rear qtr window
Putting the glass in the swing-out rear window frames requires glass setting tape. I had to try a couple of different thicknesses to get a good fit on mine.
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 05:27 AM.