Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-02-2013, 06:46 PM   #1
peters180a/170b
Senior Member
 
peters180a/170b's Avatar
 
Join Date: May 2010
Location: Putnam Valley N.Y.
Posts: 2,151
Default what do you collect of parts ...and how many?

I just can't pass up a good price on 30/31 stainless steel headlight buckets??? I have 2 cars but 3 sets of headlights extra???I ask myself why? I have 6 extra carbs. 5 engines why... When does it stop ...when one runs out of room or money?? It's not like these parts are hard to find...l.o.l
peters180a/170b is offline   Reply With Quote
Old 01-02-2013, 06:55 PM   #2
Barry B./ Ma.
Senior Member
 
Barry B./ Ma.'s Avatar
 
Join Date: May 2010
Location: Southbridge, Ma.
Posts: 1,614
Default Re: what do you collect of parts ...and how many?

I was always a nut for wheels, I still have a few 21" in all kinds of condition, also had some 16s but sold them then got around 20 17" of which I had 5 powdercoated and tried on the roadster. Had 8 Model A's but now down to 3. What's wrong with us!
Barry B./ Ma. is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-02-2013, 07:07 PM   #3
ronn
Senior Member
 
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,785
Default Re: what do you collect of parts ...and how many?

Wheels carbs and headlights.... though the extra headlights are finally gone.

Can't have too many wheels and carbs, to fix up that 50 year old "barn find".
ronn is offline   Reply With Quote
Old 01-02-2013, 07:09 PM   #4
TinCup
Senior Member
 
TinCup's Avatar
 
Join Date: May 2010
Location: OKC / Tonkawa, Ok.
Posts: 1,977
Default Re: what do you collect of parts ...and how many?

Yeah I am there with 5 carbs 3 water pumps and assorted others. Never know when the next project comes along.
TinCup is offline   Reply With Quote
Old 01-02-2013, 07:10 PM   #5
Maclab58
Senior Member
 
Maclab58's Avatar
 
Join Date: Jul 2010
Location: Wichita Falls, Texas
Posts: 983
Default Re: what do you collect of parts ...and how many?

Some drink, some do drugs, some collect cats. My wife has a shoe addiction. I just can't resist model A parts. I have 2 model A's and a 40' shipping container full of parts. I never pass up a good deal on parts whether I need them or not!!!! Call it a weakness.
Maclab58 is offline   Reply With Quote
Old 01-02-2013, 07:15 PM   #6
road_king
Member
 
road_king's Avatar
 
Join Date: Oct 2011
Location: KY
Posts: 77
Default Re: what do you collect of parts ...and how many?

Sponsored Links (Register now to hide all advertisements)
I'm guilty, I collect complete cars (11 Model A's) now, for parts.. fenders, doors, wheels, carbs, hoods, you name it I got it... I love it
road_king is offline   Reply With Quote
Old 01-02-2013, 07:20 PM   #7
msmaron
Senior Member
 
msmaron's Avatar
 
Join Date: May 2010
Location: Wauconda, IL
Posts: 3,600
Send a message via AIM to msmaron
Default Re: what do you collect of parts ...and how many?

cast iron fuel bowls..why i have no fricken idea...but i have 12 of them....nuts right!
__________________
Mark Maron
Ill., Region MARC & MAFCA
MARC JSC Member MAFFI Trustee
National Facebook Admin.
https://www.facebook.com/groups/MARC.group/

A7191-Sport Coupe
29 Roadster
29-Town Sedan
29-Original Special Coupe
msmaron is offline   Reply With Quote
Old 01-02-2013, 07:21 PM   #8
peters180a/170b
Senior Member
 
peters180a/170b's Avatar
 
Join Date: May 2010
Location: Putnam Valley N.Y.
Posts: 2,151
Default Re: what do you collect of parts ...and how many?

1 thing i am sorry about [kinda] i had 3 extra sets of running board molding for the 1930. [The super repro sets] .Sold them to 2 -180A and 1 Roadster owner.. Now Bob does not see for another year to start making them again... Maybe..... I am just worried about the outside piece. Mark , i have 5 extra cast iron bowls now that all of 1930 is glass....
peters180a/170b is offline   Reply With Quote
Old 01-02-2013, 07:28 PM   #9
c125bob
Senior Member
 
c125bob's Avatar
 
Join Date: Aug 2012
Location: Chattahoochee Hills, Ga
Posts: 143
Default Re: what do you collect of parts ...and how many?

I'm guilty, haven't been at it long but can't resist, if I see it I buy it.
__________________
Bob
1930 Tudor
Chattahoochee Hills, Ga
c125bob is offline   Reply With Quote
Old 01-02-2013, 07:30 PM   #10
Elcastor
Senior Member
 
Elcastor's Avatar
 
Join Date: Oct 2010
Location: Oregon and Baja Mexico
Posts: 617
Default Re: what do you collect of parts ...and how many?

No wonder I have a hard time finding parts!!!

Maybe it would be a little easier if I were not in Mexico, but it sounds like you guys already have all the good ones!
__________________
Ben Purkey
Mexico and the Pacific NW
http://www.martin-parry.com/
Elcastor is offline   Reply With Quote
Old 01-02-2013, 07:40 PM   #11
msmaron
Senior Member
 
msmaron's Avatar
 
Join Date: May 2010
Location: Wauconda, IL
Posts: 3,600
Send a message via AIM to msmaron
Default Re: what do you collect of parts ...and how many?

Quote:
Originally Posted by peters180a/170b View Post
Mark , i have 5 extra cast iron bowls now that all of 1930 is glass....
Ok ill take them.hahaha lol..never knew why i kept buying them Honest pete im nuts...NOW if i could find original fan belts we would both collect them hahahaah
__________________
Mark Maron
Ill., Region MARC & MAFCA
MARC JSC Member MAFFI Trustee
National Facebook Admin.
https://www.facebook.com/groups/MARC.group/

A7191-Sport Coupe
29 Roadster
29-Town Sedan
29-Original Special Coupe
msmaron is offline   Reply With Quote
Old 01-02-2013, 08:11 PM   #12
ursus
Senior Member
 
Join Date: May 2010
Location: Oregon
Posts: 1,374
Default Re: what do you collect of parts ...and how many?

For me it can start with looking long and hard for something and then, when I finally find it, the same part suddenly begins appearing all over the place and the hoarding bug takes over. Good sense eventually returns but by then I end up with multiples of the item. For a while it was Model-B carbs (have 22), then NOS transmission gears (whew!), then NOS and NORS engine components (guess I need to get more blocks!). Where does it end?
ursus is offline   Reply With Quote
Old 01-02-2013, 08:18 PM   #13
RHD
Senior Member
 
RHD's Avatar
 
Join Date: Jan 2011
Location: New Zealand
Posts: 665
Default Re: what do you collect of parts ...and how many?

I think the collecting Model 'A' parts is some kind of incurable disease. I have been stricken with it your many years now. At Swap Meets the disease really takes hold and it gives me the ability to smell Model 'A' parts from quite a distance. My wife hasn't got it and she thinks I will never be cured. A lot of my friends have it also. One had it so bad, his wife left him, as there was no room left on the kitchen table.
__________________
R.H.D.
Author of Model 'A' Ford technical manuals.
Supplier of good original RHD parts.
RHD is offline   Reply With Quote
Old 01-02-2013, 08:21 PM   #14
Greg Jones
Senior Member
 
Greg Jones's Avatar
 
Join Date: Jul 2010
Location: Aiken, South Carolina
Posts: 695
Default Re: what do you collect of parts ...and how many?

Ursus, let me help your afflication by taking some of those NOS parts off your hand. Not to worry, I will pay for shipping. By the way, my affliction is speedometers and headlights. 30-31 stuff
Greg Jones is offline   Reply With Quote
Old 01-02-2013, 08:51 PM   #15
CarlG
Senior Member
 
CarlG's Avatar
 
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,115
Default Re: what do you collect of parts ...and how many?

Tools.

Oh, and wheels.
CarlG is offline   Reply With Quote
Old 01-02-2013, 08:59 PM   #16
Mike Peters
Senior Member
 
Mike Peters's Avatar
 
Join Date: Aug 2012
Location: South East Wisconsin
Posts: 1,279
Default Re: what do you collect of parts ...and how many?

Parts are harder to come by than cars, particularly the scarce stuff. A couple years ago I bought an original 28 radiator and fan shroud on an auction because I knew they are scarce. I didn't even have a car at the time to put it on. Then this summer I bought a a 28 business coup that was unrestored and only mildly molested, so guess what? It needed a fan shroud, and I already had one. So don't beat yourselves up for buying stuff you don't need at the time, because there will surely come a day when you will.
Mike Peters is offline   Reply With Quote
Old 01-02-2013, 09:29 PM   #17
MikeK
Senior Member
 
MikeK's Avatar
 
Join Date: May 2010
Location: Windy City
Posts: 2,919
Default Re: what do you collect of parts ...and how many?

I collect headlight glass. 100+ pieces and counting. I could show you things the J.S. don't address, like the fine nearly invisible changes in Twolite rows three & four of the lens elements. As time progressed tiny changes affecting projected pattern occurred.

Here are FOUR different row-three center element changes:
Vertical convex, Vertical flat, Back-tilted flat, Horizontal concave with front tilt.
. . .and two beam spread variations of row four central groups.

This is just one slide from my 45 minute powerpoint presentation and hands-on-glass display


There are many other little known variations.
I also know way too much about the history of the McKee glass company!

Yeah, I collect other stuff, too.
About 2000 sq.ft. full to the ceiling in three buildings.
MikeK is offline   Reply With Quote
Old 01-02-2013, 09:36 PM   #18
David Martin
Member
 
Join Date: May 2010
Posts: 84
Default Re: what do you collect of parts ...and how many?

All of you guys obviously need to mark your calendars for the Illinois Region MARC Swap Meet at the Kane County Fair Grounds in St. Charles, Illinois on February 17, 2013.

Contact Mark Maron for details.
David Martin is offline   Reply With Quote
Old 01-02-2013, 10:16 PM   #19
glenn in camino
Senior Member
 
glenn in camino's Avatar
 
Join Date: May 2010
Location: Camino, CA.
Posts: 3,086
Default Re: what do you collect of parts ...and how many?

I like small parts that fit in my bin boxes. Especially 1928 stuff. I try to stay away from big things that are hard to store.
glenn in camino is offline   Reply With Quote
Old 01-02-2013, 10:57 PM   #20
Rowdy
BANNED
 
Join Date: May 2010
Location: Gothenburg Nebraska Just off I-80
Posts: 4,893
Default Re: what do you collect of parts ...and how many?

Era Mallory Distributors, horns, engines and Powerhouse generators. I need to sell a couple of hors and buy a downdraft intake to go with the 97LZ carburetor, but that will be awhile before I do. Rod
__________________
Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!
Rowdy is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:11 PM.