1930 CCPU door glass size

[Larry Jenkins]

Can some one give me the exact glass size for 1930 CCPU doors? Including the corner radiis?

Thank you!

Larry

[Gary WA]

service bulletins page 250 has glass sizes,same as coupe?

[glenn in camino]

Look in the yellow, hard cover service bulletins.

[SSsssteamer]

Originally Posted by Gary WA

service bulletins page 250 has glass sizes,same as coupe?

The 30 - 31 coupe glass is a couple of inches or so narrower than the 30 - 31 CCPU. As they both use the same doors, the 30 -31 CCPU and the 30 - 31 Tudor both have the same sized door glass. I tried using the Model A service bulletins for my 31 CCPU for the door glass and for the back window but the bulletins were of no help. They had about everything but what I needed. I ended up measuring the door's window openings for the glass shop and the door glass fit excellent. The glass shop also used my rear window frame for its glass pattern.

[john charlton]

Just measured door glass out of a 31 tudor which is the same as mid 30 /31 CCPU.

Height 16 3/8"

Width 26 3/4"

Thickness 1/8"


John in weather was cancelled again today Suffolk County England .

[C26Pinelake]

Sponsored Links (Register now to hide all advertisements)

Macs has them at a very reasonable price! Wayne

[Larry Jenkins]

Originally Posted by john charlton

Just measured door glass out of a 31 tudor which is the same as mid 30 /31 CCPU.

Height 16 3/8"

Width 26 3/4"

Thickness 1/8"


John in weather was cancelled again today Suffolk County England .

Thanks John..

Isn't original glass 1/4" thick? (I've read anywhere from 0.220 to 0.250)

Larry

[john charlton]

Yes I did a double check and it is dead 3/16" thick . This is original plate glass . The edges are ground with a slight domed effect . The upper corners have a tight radius I suppose to avoid a sharp corner . In UK we are now metric and the closest laminated glass is 6mm thick which about 3/16" and works OK .

John in wild and windy storm "Frank" 80 MPH in the north of UK ,heavy rain and floods Suffolk County England .

[Bob C]

The Service Bulletins show the plate glass 5/32" to 9/32" and triplex glass
.180" to .200" thick.

Bob

[CarlG]

That's quite a range for the plate glass:
5/32 = .156
9/32 = .281

[Bob C]

That's what I though also, maybe it should have been 7/32". If I remember
correctly from other posts there are other errors in the glass chart.

Bob

[30 Mike]

I found this on a previous post

Originally Posted by john charlton

Just measured door glass out of a 31 tudor which is the same as mid 30 /31 CCPU.

Height 16 3/8"

Width 26 3/4"

Thickness 1/8"


John in weather was cancelled again today Suffolk County England .

[30 Mike]

This was added to the post later

Originally Posted by john charlton

Yes I did a double check and it is dead 3/16" thick . This is original plate glass . The edges are ground with a slight domed effect . The upper corners have a tight radius I suppose to avoid a sharp corner . In UK we are now metric and the closest laminated glass is 6mm thick which about 3/16" and works OK .

John in wild and windy storm "Frank" 80 MPH in the north of UK ,heavy rain and floods Suffolk County England .