|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-10-2014, 01:25 PM | #1 |
Junior Member
Join Date: May 2010
Posts: 20
|
!940 ford with charging problem
Hi I'am back, still working on my 1940 ford charging problem. Can any one tell me how many wires should be attached to the BAT terminal on the voltage regulator. This one has two and when you remove them and measure to voltage they both have 6.24 volts. Thanks Winchester
|
04-10-2014, 06:23 PM | #2 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
|
Re: !940 ford with charging problem
Sponsored Links (Register now to hide all advertisements)
http://www.vanpeltsales.com/FH_web/F...ing1940std.jpg Since this was a 6-volt power wire direct to the buss then they may have tapped off of it for under the hood electrical stuff. The bat connection of the regulator would be connected to the cut out pole in the diagram. |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|