Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 12-17-2017, 12:10 AM   #1
JtownJoe
Senior Member
 
JtownJoe's Avatar
 
Join Date: May 2010
Location: Johnstown, PA
Posts: 332
Smile Crank Pulley fixed

Hi guys, I'm following up on my post from about 6 weeks ago. I'm delighted yo say the new 2 pc. (screw in type) crankshaft pulley & oil slinger is installed and no leaks yet.
I tested it over the course of a few weeks with some hard pulls on a few long steep hills and all is dry, so far, after about 100 miles.
Thanx to all who offered advice on the correct orientation of the "new type" front seal and the new oil slinger, I followed the "leakless oil pan" instructions exactly, and so far so good.
I'll update my results if there are any changes after more time and miles on the road, the winter weather has my Tudor garage bound for now.
Thanx again to all who took the time reply!!
JtownJoe is offline   Reply With Quote
Old 12-17-2017, 08:35 AM   #2
old31
Senior Member
 
Join Date: Jan 2016
Posts: 883
Default Re: Crank Pulley fixed

That's great news. Thanks for the feedback.
old31 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 12-17-2017, 08:41 AM   #3
divcoone
Member
 
divcoone's Avatar
 
Join Date: Jun 2017
Posts: 81
Default Re: Crank Pulley fixed

Lets hope for a early spring Joe.
divcoone is offline   Reply With Quote
Old 12-17-2017, 02:19 PM   #4
Gary WA
Senior Member
 
Gary WA's Avatar
 
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 2,767
Default Re: Crank Pulley fixed

Thanks on the update!
__________________
www.whidbeymodelaclub.com
Gary WA is offline   Reply With Quote
Old 12-17-2017, 08:26 PM   #5
Beater
Senior Member
 
Beater's Avatar
 
Join Date: Aug 2015
Location: Southern Alberta
Posts: 386
Default Re: Crank Pulley fixed

leakless oil pan ?????
Beater is offline   Reply With Quote
Old 12-18-2017, 06:05 PM   #6
JtownJoe
Senior Member
 
JtownJoe's Avatar
 
Join Date: May 2010
Location: Johnstown, PA
Posts: 332
Default Re: Crank Pulley fixed

It is a very well done article by Frank Rosin from Washington State. I'll try to attach it if I can, if not, I'm sure someone else will help.
Sorry, not able to.
JtownJoe is offline   Reply With Quote
Old 12-18-2017, 06:07 PM   #7
JtownJoe
Senior Member
 
JtownJoe's Avatar
 
Join Date: May 2010
Location: Johnstown, PA
Posts: 332
Default Re: Crank Pulley fixed

Hi Bob. Amen, to that!
JtownJoe is offline   Reply With Quote
Old 12-19-2017, 08:52 AM   #8
jwilliams81
Senior Member
 
jwilliams81's Avatar
 
Join Date: Sep 2016
Location: Cincinnati OH
Posts: 290
Default Re: Crank Pulley fixed

Leakless Oil Pan Instructions

https://modelatouringclub.files.word...et-article.pdf
__________________
1931 Murray Town Sedan. Black body with Apple Green pin stripe. Cincinnati, OH
jwilliams81 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:03 PM.