|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-02-2021, 11:05 AM | #1 |
Senior Member
Join Date: May 2010
Posts: 2,212
|
cabs 1940- 1941
can some one tell me if the 1940 and 1941 1/2 ton pickups have the same cab thanks Tom
|
01-02-2021, 12:41 PM | #2 |
Senior Member
Join Date: May 2010
Location: upstate SC
Posts: 2,963
|
Re: cabs 1940- 1941
yes, the only difference is the 40 cab has a raised area in the middle of the dash for the cast Ford script, the cabs to 1947 had a flat area with two holes for a Ford badge. 42 to 47 had a different seat, instead of sitting on the gas tank you sat above it on a frame surround. a few other differences in 42/47 are the mounting holes/brackets for the fenders
|
Sponsored Links (Register now to hide all advertisements) |
|
01-02-2021, 12:48 PM | #3 | |
Senior Member
Join Date: May 2010
Location: Northridge, CA
Posts: 236
|
Re: cabs 1940- 1941
Quote:
Basically identical. Two minor differences are the holes in windshield frame for the heater nozzles became larger in 1941 to fit the later nozzles. A second difference is the stamping of dash center is different because the dash center trim is different. The 40 uses a script 'Ford" and the 41 uses a rectangular piece with Ford script....... Perhaps some minor differences on the firewall but I am not sure. That should do it..... |
|
01-02-2021, 01:03 PM | #4 |
Senior Member
Join Date: May 2010
Posts: 2,212
|
Re: cabs 1940- 1941
Many thanks Guys for the info, Tom
|
01-02-2021, 01:19 PM | #5 |
Senior Member
Join Date: Apr 2015
Location: Oregon City, OR
Posts: 285
|
Re: cabs 1940- 1941
The access covers in the doors for 1940 are held by 5 screws while the covers for the 41 thru 47 doors are held by 8 screws.
|
01-02-2021, 01:44 PM | #6 |
Senior Member
Join Date: May 2010
Posts: 2,484
|
Re: cabs 1940- 1941
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|