Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-09-2013, 01:04 PM   #1
Ross6860
Senior Member
 
Join Date: Jul 2013
Posts: 196
Default Ford Wide 5 vs VW Wide 5 Wheels

Are Ford Wide 5 wheels the same pattern as VW Wide 5s?

VWs are listed as 5x205 I assume 205mm diameter bolt circle.

I found wide five to standard Ford adapters, but they are listed as VW to Ford, not Ford to Ford.

If these adapters will work it's a lot easier than having wheels custom made from original wide 5 centers.
Ross6860 is offline   Reply With Quote
Old 10-09-2013, 01:15 PM   #2
Lanny
Senior Member
 
Lanny's Avatar
 
Join Date: May 2010
Location: Mn
Posts: 2,403
Default Re: Ford Wide 5 vs VW Wide 5 Wheels

NO, the VW's are about 8" bc., and Ford wide 5's are 10 1/4" bc.










.
__________________
My Wife Says That I Never Listen to Her,
I Think That's What She Said


If mama ain't happy, ain't nobody happy.
But if daddy ain't happy...RUN
Lanny is online now   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-09-2013, 01:17 PM   #3
Mart
Senior Member
 
Mart's Avatar
 
Join Date: May 2010
Location: Solihull, England.
Posts: 8,732
Default Re: Ford Wide 5 vs VW Wide 5 Wheels

Nowhere near. Ford wide 5's are on a 10-1/4" circle.

English ford wide 5's (Pop, Prefect, Anglia) are close to vw, but not exactly the same.

Mart.
Mart is offline   Reply With Quote
Old 10-09-2013, 01:42 PM   #4
Charlie Stephens
Senior Member
 
Join Date: May 2010
Location: Southern California
Posts: 7,017
Default Re: Ford Wide 5 vs VW Wide 5 Wheels

Quote:
Originally Posted by Ross6860 View Post
Are Ford Wide 5 wheels the same pattern as VW Wide 5s?

VWs are listed as 5x205 I assume 205mm diameter bolt circle.

I found wide five to standard Ford adapters, but they are listed as VW to Ford, not Ford to Ford.

If these adapters will work it's a lot easier than having wheels custom made from original wide 5 centers.
What do you have and what do you want to end up with? I assume the VW to Ford adapters you are looking at are late ford (not 5 on 5 1/2)

Charlie Stephens
Charlie Stephens is offline   Reply With Quote
Old 10-09-2013, 02:42 PM   #5
CaliforniaBorn36
Senior Member
 
CaliforniaBorn36's Avatar
 
Join Date: Oct 2012
Location: San Francisco Bay Area
Posts: 427
Default Re: Ford Wide 5 vs VW Wide 5 Wheels

You are probably looking for something like this so that you don't have to use a wide five wheel:

http://dickspadaro.com/wheel_adapter.htm

I am in no way associated with Dick Spadaro, and do not use these adapters, so other might be able to chime in on quality and function of this part.

Also, Mart mentions something regarding the English Wide five which makes it sound like it is different.
CaliforniaBorn36 is offline   Reply With Quote
Old 10-10-2013, 02:38 AM   #6
Manuel
Senior Member
 
Join Date: May 2010
Location: ACT Australia
Posts: 506
Default Re: Ford Wide 5 vs VW Wide 5 Wheels

Sponsored Links (Register now to hide all advertisements)
My book agrees with the above.
VW Beetles 1952-67, Kombis 1955-70 & some Type 3s had the 5 x 205mm. After that the Kombis had 5 x 112mm & Beetles 4 x 130.
I would be interested to know what the old Ford Pops, Defects and Anglias had? Surely 10 1/4" would be too big for those little brake drums.
What about the 1960s Pontiacs? Some of them had wide bolt circles.
And for the Aussies, FXs and FJs had 5 x 6 3/8".

Whew. HTH

Manuel in Oz
Manuel is offline   Reply With Quote
Old 10-10-2013, 07:34 PM   #7
Ross6860
Senior Member
 
Join Date: Jul 2013
Posts: 196
Default Re: Ford Wide 5 vs VW Wide 5 Wheels

Quote:
Originally Posted by CaliforniaBorn36 View Post
You are probably looking for something like this so that you don't have to use a wide five wheel:

http://dickspadaro.com/wheel_adapter.htm

I am in no way associated with Dick Spadaro, and do not use these adapters, so other might be able to chime in on quality and function of this part.

Also, Mart mentions something regarding the English Wide five which makes it sound like it is different.
Wrong way. That's so you can use Wide 5s on a standard hub. Lots of them out there. No one goes the other (that I know of) way except the VW ones I found.

Quote:
Originally Posted by Charlie Stephens View Post
What do you have and what do you want to end up with? I assume the VW to Ford adapters you are looking at are late ford (not 5 on 5 1/2)

Charlie Stephens
I have Wide 5 hubs (1936 Tudor)

Looking to go to a more modern tire/wheel combo

There is a solution, but like anything on these cars, it ain't cheap.

Wheelsmith will build whatever you want on a Wide 5 center. They state with the correct backspacing that a 7" wide rim will fit in a '36 with no fender or suspension interference. This is probably the way I will go when I get around to it.

There's a member that sells Wide 5 centers already pulled. Perfect. I don't need to sacrifice good wheels.
Ross6860 is offline   Reply With Quote
Old 10-10-2013, 07:45 PM   #8
PeteVS
Senior Member
 
PeteVS's Avatar
 
Join Date: May 2010
Location: FP, NJ
Posts: 2,769
Default Re: Ford Wide 5 vs VW Wide 5 Wheels

Quote:
Originally Posted by Manuel View Post
What about the 1960s Pontiacs? Some of them had wide bolt circles.
Manuel in Oz
The Pontiacs were wide eights, no where near wide fives.


Quote:
Originally Posted by Ross6860 View Post
Are Ford Wide 5 wheels the same pattern as VW Wide 5s?
Interestingly, they are related. John Tjaarda was a European designer working for Briggs. He developed the "Briggs Dream Car" for Ford. That was a rear engined monocoque show car. Ford dumped the entire project when Briggs got too close to Chrysler. The design was very influential in the original design of Germany's People's Car.
__________________
Don't never get rid of nuthin!

Last edited by PeteVS; 10-10-2013 at 07:54 PM.
PeteVS is offline   Reply With Quote
Old 10-10-2013, 08:31 PM   #9
Yoyodyne
Senior Member
 
Yoyodyne's Avatar
 
Join Date: Nov 2010
Location: Lancaster PA
Posts: 527
Default Re: Ford Wide 5 vs VW Wide 5 Wheels

Quote:
Originally Posted by Ross6860 View Post



I have Wide 5 hubs (1936 Tudor)

Looking to go to a more modern tire/wheel combo
You could install 1935 brakes drums. They interchange and have 5 X 5-1/2 bolt circle. Not ideal, but a pattern you can work with.
Yoyodyne is offline   Reply With Quote
Old 10-12-2013, 01:20 AM   #10
Manuel
Senior Member
 
Join Date: May 2010
Location: ACT Australia
Posts: 506
Default Re: Ford Wide 5 vs VW Wide 5 Wheels


The Pontiacs were wide eights, no where near wide fives.


I did't say they were 5s. I was just asking about all the wide bolt patterns [PCDs] I could think of.

Has anybody discovered the bolt pattern of the old UK Fords eg Prefects, Pops etc?
I would like to put them on my list.

Cheers,

Manuel in Oz
Manuel is offline   Reply With Quote
Old 10-12-2013, 09:37 AM   #11
DICK SPADARO
Senior Member
 
Join Date: May 2010
Location: Altamont, NY
Posts: 1,004
Default Re: Ford Wide 5 vs VW Wide 5 Wheels

Ross6860, If you wish to opt out of your wide 5 wheel bolt pattern, you have a problem if you have mechanical brakes. You cannot exchange 1935 small bolt pattern front hubs with the 1936 hubs as the spindle snout lengths are different. You cannot use 1940-48 hubs as the brake surface offset is different. You cannot purchase adapters as the snout design interferes with the smaller bolt pattern.
__________________
dickspadaro.com
DICK SPADARO is offline   Reply With Quote
Old 10-12-2013, 10:46 PM   #12
Yoyodyne
Senior Member
 
Yoyodyne's Avatar
 
Join Date: Nov 2010
Location: Lancaster PA
Posts: 527
Default Re: Ford Wide 5 vs VW Wide 5 Wheels

Quote:
Originally Posted by DICK SPADARO View Post
You cannot exchange 1935 small bolt pattern front hubs with the 1936 hubs as the spindle snout lengths are different.
Which spindle is longer? I was told they interchange, and bought a set of 35 drums to put on my 36 but haven't done the work yet. Now I'm hoping I can make spacers or modify something to make it work.
Yoyodyne is offline   Reply With Quote
Old 10-13-2013, 09:44 AM   #13
DICK SPADARO
Senior Member
 
Join Date: May 2010
Location: Altamont, NY
Posts: 1,004
Default Re: Ford Wide 5 vs VW Wide 5 Wheels

To Yoyodyne, although 35/6 cars and Pu carry the same king pin, the spindle design is different. the 1935 spindle has a longer snout measure from the face to the end than the 1936 spindle. Roughly 35 spindles are 6" long and 36's are 5 1/2" long while the drums may bolt on you will have to check the bearing crush and determine if the castle nut will tighten correctly.
__________________
dickspadaro.com
DICK SPADARO is offline   Reply With Quote
Old 10-13-2013, 01:05 PM   #14
Ross6860
Senior Member
 
Join Date: Jul 2013
Posts: 196
Default Re: Ford Wide 5 vs VW Wide 5 Wheels

Quote:
Originally Posted by DICK SPADARO View Post
Ross6860, If you wish to opt out of your wide 5 wheel bolt pattern, you have a problem if you have mechanical brakes. You cannot exchange 1935 small bolt pattern front hubs with the 1936 hubs as the spindle snout lengths are different. You cannot use 1940-48 hubs as the brake surface offset is different. You cannot purchase adapters as the snout design interferes with the smaller bolt pattern.
Thanks for the info.

I have an Early V8 Garage juice brake kit that came with the car.

It looks like this winter's project will be installing the hydraulic brakes.

The wife likes the stock wheels and wide whites, so maybe just Coker radials are in the future.
Ross6860 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:20 PM.