The Ford Barn

Vanspeed · 06-18-2019, 08:17 PM

Can anybody here cut keys? I need A1100 and A1127. Please let me know as I would like some keys made for my coupe. Thanks.

Jeff

CWPASADENA · 06-18-2019, 08:35 PM

Contact Dick Crabtree

605-487-7229

mbcrabtree@aol.com

He may be able to cut the keys from the numbers.

Dick is also very good at door lock restoration and Pop-Out Ignition restoration.

Chris W.

Vanspeed · 06-18-2019, 09:46 PM

Thanks for that info, I appreciate it.

monto · 06-19-2019, 08:21 AM

Suggest you go into site entitled 'model a ford garage' where you may find general information about the variety of keys (shapes, milling, etc.) made for A's.

The A1100 & 1127 #'s should steer you to specific codes from which the blank can be cut. Also, a specific key blank must be identified to which the code is cut.

Basically, appropriate blank + code = correct cut. (hope this is helpful)

Bob C · 06-19-2019, 10:03 AM

Just had A & L cut me a key from the number.

Bob

Vanspeed · 06-19-2019, 10:18 PM

Dick is making me two keys. Thanks for the info guys.

06-18-2019, 08:17 PM	#1
Vanspeed Senior Member Join Date: May 2010 Location: Waterford, Mich. Posts: 3,012	Can anybody here cut keys? Can anybody here cut keys? I need A1100 and A1127. Please let me know as I would like some keys made for my coupe. Thanks. Jeff __________________ *Respecting and Resurrecting Ford Model A's.*

06-18-2019, 08:35 PM	#2
CWPASADENA Senior Member Join Date: May 2010 Location: PASADENA, CA Posts: 1,329	Re: Can anybody here cut keys? Contact Dick Crabtree 605-487-7229 mbcrabtree@aol.com He may be able to cut the keys from the numbers. Dick is also very good at door lock restoration and Pop-Out Ignition restoration. Chris W.

06-18-2019, 09:46 PM	#3
Vanspeed Senior Member Join Date: May 2010 Location: Waterford, Mich. Posts: 3,012	Re: Can anybody here cut keys? Thanks for that info, I appreciate it. __________________ *Respecting and Resurrecting Ford Model A's.*

06-19-2019, 08:21 AM	#4
monto Senior Member Join Date: Apr 2015 Location: NH Posts: 170	Re: Can anybody here cut keys? Suggest you go into site entitled 'model a ford garage' where you may find general information about the variety of keys (shapes, milling, etc.) made for A's. The A1100 & 1127 #'s should steer you to specific codes from which the blank can be cut. Also, a specific key blank must be identified to which the code is cut. Basically, appropriate blank + code = correct cut. (hope this is helpful) __________________ '30 Coupe

06-19-2019, 10:03 AM	#5
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 6,486	Re: Can anybody here cut keys? Just had A & L cut me a key from the number. Bob

06-19-2019, 10:18 PM	#6
Vanspeed Senior Member Join Date: May 2010 Location: Waterford, Mich. Posts: 3,012	Re: Can anybody here cut keys? Dick is making me two keys. Thanks for the info guys. __________________ *Respecting and Resurrecting Ford Model A's.*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode