Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 02-12-2015, 04:08 PM   #1
CSArno
Senior Member
 
CSArno's Avatar
 
Join Date: Feb 2015
Location: Maine
Posts: 378
Red face motor mount part #?

Anyone have a part # from Van Pelts, Macs etc for the rear motor mounts on a '35 V8 pickup?
Looking for the rear rubber mounts and harware only. Have a new trans mount and new front mounts that came in the basket of parts with truck.

Thanks,
Chris
CSArno is offline   Reply With Quote
Old 02-12-2015, 04:34 PM   #2
JSeery
Senior Member
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 13,189
Default Re: motor mount part #?

What rear mounts are you referring to? There are engine mounts (at the front of the engine) and a transmission mount (rear of the transmission).
JSeery is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 02-12-2015, 06:11 PM   #3
CSArno
Senior Member
 
CSArno's Avatar
 
Join Date: Feb 2015
Location: Maine
Posts: 378
Default Re: motor mount part #?

Sorry I think I have the answer. The trans mount ears bolt directly to the frame. No rubber there.. Hard with the frame in one shop and the motor and trans in a shop across town and this being the first one that I have tackled.

Thanks though,
Chris
CSArno is offline   Reply With Quote
Old 02-12-2015, 06:15 PM   #4
JSeery
Senior Member
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 13,189
Default Re: motor mount part #?

Yep, think you have it.
JSeery is offline   Reply With Quote
Old 02-13-2015, 02:23 PM   #5
OLD...BILL
Senior Member
 
OLD...BILL's Avatar
 
Join Date: May 2010
Location: Northern California,coast
Posts: 552
Default Re: motor mount part #?

NO you don't have it. use the same donut.( bisquits ) at all four points, complete set, top and bottom, you bolt the rear trans mount down solid to the frame, it will break, think about it, you got rubber at the front and solid at the back something going to give, and you will be looking for a new rear trans mount ?? ............OLD.......BILL
OLD...BILL is offline   Reply With Quote
Old 02-13-2015, 02:27 PM   #6
42merc
Senior Member
 
42merc's Avatar
 
Join Date: Feb 2011
Location: Buchanan, MI
Posts: 571
Default Re: motor mount part #?

Quote:
Originally Posted by OLD...BILL View Post
NO you don't have it. use the same donut.( bisquits ) at all four points, complete set, top and bottom, you bolt the rear trans mount down solid to the frame, it will break, think about it, you got rubber at the front and solid at the back something going to give, and you will be looking for a new rear trans mount ?? ............OLD.......BILL
The extra bisquits don't show up 'till '37.
The cushion is in the mount itself.
42merc is offline   Reply With Quote
Old 02-13-2015, 02:34 PM   #7
CSArno
Senior Member
 
CSArno's Avatar
 
Join Date: Feb 2015
Location: Maine
Posts: 378
Default Re: motor mount part #?

Thanks,
I thought there should donuts at the rear also until I realized that the rubber cusion is it the trans mount.
Richard Lacy confirmed there was no donuts on back.
CSArno is offline   Reply With Quote
Old 02-13-2015, 02:36 PM   #8
JSeery
Senior Member
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 13,189
Default Re: motor mount part #?

Quote:
Originally Posted by OLD...BILL View Post
NO you don't have it. use the same donut.( bisquits ) at all four points, complete set, top and bottom, you bolt the rear trans mount down solid to the frame, it will break, think about it, you got rubber at the front and solid at the back something going to give, and you will be looking for a new rear trans mount ?? ............OLD.......BILL
It's not solid at the back, the transmission is mounted in a rubber ring.
JSeery is offline   Reply With Quote
Old 02-13-2015, 03:10 PM   #9
Bruce Lancaster
Senior Member
 
Join Date: May 2010
Location: Madison, NJ
Posts: 5,230
Default Re: motor mount part #?

And that rubber ring can be replaced if petrified.
Bruce Lancaster is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:43 AM.