160B Town Sedan rear fender

[jack99]

Could someone please describe the difference in design of the correct fender for a 1931 Town sedan (slant Window). I know there I a "dimple" for a rivet or bolt. I am going to Hershey in search of one. What would be fair value for such a fender? If you have a photo it would also help.

Thanks so much.

[J Franklin]

Do you have access to a copy of the judging standards? I thought all the '30-'31 sedan fenders were the same

[1930artdeco]

Are you looking for front or rear? I have a spare left rear if you want it.

Mike

[Oldbluoval]

I make those and have a template as to where it goes. Don't make lack of that dimple be a factor; easy fix. If you are building a true show car then you need to look for mfg markings, etc., also.

[email protected]

[160B]

Sponsored Links (Register now to hide all advertisements)

RG&JS Page 13-9 Revised 2016

• Beginning in March 1931, all sedan fenders had a dimple
stamped into the inside rear skirt. The dimple was added
to provide clearance for a body rivet on the 160 series
sedans.

see attached file