|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-21-2021, 06:55 AM | #1 |
Senior Member
Join Date: Jan 2014
Location: Leo, Indiana
Posts: 235
|
289 V8 oil pan removal
Has anyone been able to remove a 289 oil pan without having to raise the engine. Based on directions in the shop manual it can be done. The 64 Galaxie cross member goes directly under the pan. There is clearance but it's the oil pump/pickup.
The manual says after removing the pan bolt crank the engine as required to obtain clearance and remove the pan. |
07-21-2021, 08:47 AM | #2 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,416
|
Re: 289 V8 oil pan removal
Quote:
__________________
***** - DISCLAIMER -
The above posted information is in my opinion only (IMO) and may contain copy and paste material(s). In addition, any above tech information is supplied in good faith. No responsibility implied or otherwise can be accepted for the way others use or interpret provided data. Your experience(s), opinion(s) and mileage may vary. DIAGNOSED CDO - (OCD In Correct Alphabetical Order) |
|
Sponsored Links (Register now to hide all advertisements) |
|
07-23-2021, 08:09 AM | #3 |
Senior Member
Join Date: Feb 2013
Location: Pittsford NY. USA
Posts: 1,094
|
Re: 289 V8 oil pan removal
Sponsored Links (Register now to hide all advertisements)
__________________
1952 Ford F1 1965 Ford Falcon Sprint 2007 Ford Mustang GT |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|