Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-21-2020, 04:58 PM   #1
lotsagas4u
Senior Member
 
Join Date: Apr 2011
Location: Plainview, Texas
Posts: 568
Default 1933 inner fender question?

My 33 inner fenders have 2 holes at front, for mounting to the bottom radiator splash shied. The replacement shield has 1 hole drilled on each side, did the original shield have 2 holes on each side? Thanks
lotsagas4u is offline   Reply With Quote
Old 01-21-2020, 06:52 PM   #2
DavidG
Senior Member
 
DavidG's Avatar
 
Join Date: May 2010
Posts: 6,621
Default Re: 1933 inner fender question?

Yes, and on the '33 version clinch (D) nuts were originally installed in the four holes, two per side. The '34 version only has the plain holes, two per side. My impression is that all of the reproductions are of the '34 versions which have a number of other differences compared to original '33s, of which there are several versions depending on the point in time during the model year..
DavidG is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-21-2020, 07:03 PM   #3
lotsagas4u
Senior Member
 
Join Date: Apr 2011
Location: Plainview, Texas
Posts: 568
Default Re: 1933 inner fender question?

Thought so, Thank You
lotsagas4u is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:57 PM.