|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-08-2015, 08:10 PM | #24 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: No spark at distributor
If you can't get 6 volts to the OPEN points contact with the key ON, then you might have the cable screwed into the housing too far. It only should be screwed in a couple turns, or three at the most.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|