The Ford Barn

streetdreams · 07-21-2011, 09:02 PM

For Sale: 1957 Ford 312 engine. Rebuilt or as a core

Location: Howell, Mich Price: $4600
Got a great 312 core out of a '57 Ford slated for rebuild.

Standard bore and standard crank. Hard to believe. All '57 stuff. ECZ-G heads, ECZ-B intake, Hi-ratio rockers, flat top manifolds, etc. This will be one sweet Y-Block when done. Can be built with pass car or rear sump oil pan, buyers choice. Auto now, manual is extra cost at buyers choice before balancing.
Will be completely gone through, heads rebuilt with hardened seats, balanced and blueprinted, etc, and all the required oiling system mods.
Engine will be run in on a test stand when finished and ready to go.
$4600, and it can be put on the lay-a-way plan.

Can be bought as a core for $1200
[email protected]

streetdreams · 08-25-2011, 09:32 AM

Available as a core for $1200.........

streetdreams · 01-22-2012, 05:08 PM

BTTT

Standard bore, standard crank, High ratio rockers, "B" intake, '57 distributor, exhaust manifolds, "G" heads, rods and all the rest of the engine. You couldn't buy all this stuff seperate for $1200.

streetdreams · 03-06-2012, 07:38 PM

Bttt

streetdreams · 03-17-2012, 10:13 AM

Bttt

streetdreams · 03-23-2012, 08:04 PM

Sponsored Links (Register now to hide all advertisements)

SOLD ! Thanks Ken

07-21-2011, 09:02 PM	#1
streetdreams Senior Member Join Date: Dec 2010 Location: Howell, Michigan, USA, The Peoples Slightly Overspent Demodependancy of Michigan Posts: 638	1957 Ford 312 engine City: Howell State: Michigan Price: $4600 For Sale: 1957 Ford 312 engine. Rebuilt or as a core Location: Howell, Mich Price: $4600 Got a great 312 core out of a '57 Ford slated for rebuild. Standard bore and standard crank. Hard to believe. All '57 stuff. ECZ-G heads, ECZ-B intake, Hi-ratio rockers, flat top manifolds, etc. This will be one sweet Y-Block when done. Can be built with pass car or rear sump oil pan, buyers choice. Auto now, manual is extra cost at buyers choice before balancing. Will be completely gone through, heads rebuilt with hardened seats, balanced and blueprinted, etc, and all the required oiling system mods. Engine will be run in on a test stand when finished and ready to go. $4600, and it can be put on the lay-a-way plan. Can be bought as a core for $1200 [email protected] Last edited by streetdreams; 11-23-2011 at 05:05 PM.

08-25-2011, 09:32 AM	#2
streetdreams Senior Member Join Date: Dec 2010 Location: Howell, Michigan, USA, The Peoples Slightly Overspent Demodependancy of Michigan Posts: 638	Re: 1957 Ford 312 engine Available as a core for $1200.........

01-22-2012, 05:08 PM	#3
streetdreams Senior Member Join Date: Dec 2010 Location: Howell, Michigan, USA, The Peoples Slightly Overspent Demodependancy of Michigan Posts: 638	Re: 1957 Ford 312 engine BTTT Standard bore, standard crank, High ratio rockers, "B" intake, '57 distributor, exhaust manifolds, "G" heads, rods and all the rest of the engine. You couldn't buy all this stuff seperate for $1200.

03-06-2012, 07:38 PM	#4
streetdreams Senior Member Join Date: Dec 2010 Location: Howell, Michigan, USA, The Peoples Slightly Overspent Demodependancy of Michigan Posts: 638	Re: 1957 Ford 312 engine Bttt

03-17-2012, 10:13 AM	#5
streetdreams Senior Member Join Date: Dec 2010 Location: Howell, Michigan, USA, The Peoples Slightly Overspent Demodependancy of Michigan Posts: 638	Re: 1957 Ford 312 engine Bttt

03-23-2012, 08:04 PM	#6
streetdreams Senior Member Join Date: Dec 2010 Location: Howell, Michigan, USA, The Peoples Slightly Overspent Demodependancy of Michigan Posts: 638	Re: 1957 Ford 312 engine Sponsored Links (Register now to hide all advertisements) *SOLD ! Thanks Ken*