|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-13-2019, 01:28 PM | #1 |
Member
Join Date: May 2015
Location: KS
Posts: 49
|
1935 Coupe trunk hinge disassembly
How do you disassemble the trunk hinges on a 35 coupe?
On the inside there appears a tab locking the hinge pin in place. I would like to remove the pin.
__________________
We buy our problems |
12-13-2019, 05:23 PM | #2 |
Senior Member
Join Date: Jul 2011
Location: Alvaton, Kentucky, USA
Posts: 952
|
Re: 1935 Coupe trunk hinge disassembly
If I remember correctly, on my '36 3W coupe, the pin has a grove concentric to the pin diameter on one end and has a circlip or snap ring in the groove, preventing the pin from comming out. Remove the circlip and the pin pushes out. I think the '35 is the same. Hard to see it without climbing in the trunk.
|
Sponsored Links (Register now to hide all advertisements) |
|
12-14-2019, 01:08 AM | #3 |
Senior Member
Join Date: May 2010
Location: Minnesota
Posts: 1,137
|
Re: 1935 Coupe trunk hinge disassembly
The cap on the hinge pin has 4 small tabs. Use a screw driver to pry off the cap, and the pin can be removed.
|
12-17-2019, 05:58 PM | #4 |
Member
Join Date: May 2015
Location: KS
Posts: 49
|
Re: 1935 Coupe trunk hinge disassembly
Sponsored Links (Register now to hide all advertisements)
__________________
We buy our problems |
|
|
Sponsored Links (Register now to hide all advertisements) |
|