Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-28-2020, 06:44 PM   #1
Rockbass
Junior Member
 
Rockbass's Avatar
 
Join Date: Aug 2018
Location: Kitchener, Ontario, Canada
Posts: 17
Default What is this?

Hi All,
The car is 1947 ford sedan mostly original. This part is under the dash on the upper left corner of the firewall. It has no visible wires attached. I would like to know what it is before I take it out. Thanks for your help. Brian
Attached Images
File Type: jpeg 20E6EA7C-10FD-4796-95A9-7D7B3087B062.jpeg (124.4 KB, 402 views)
Rockbass is offline   Reply With Quote
Old 04-28-2020, 06:48 PM   #2
petehoovie
Senior Member
 
petehoovie's Avatar
 
Join Date: May 2015
Posts: 7,933
Default Re: What is this?

It's the circuit breaker/resistor board. The resistor steps down the voltage to the coil and the circuit breaker takes the place of a fuse for your lights etc.....

__________________
The only thing nice about being imperfect is the joy it brings to others....

"Silver rings, your butt! Them's washers!"
"We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969

https://www.youtube.com/watch?v=7NReUd2_0u0

Last edited by petehoovie; 04-28-2020 at 07:01 PM.
petehoovie is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 04-28-2020, 07:44 PM   #3
JSeery
Member Emeritus
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
Default Re: What is this?

Yes, ballast resistor and circuit breakers. On a 47 there should be two circuit breakers inside the enclosure, both for the lighting circuits. If it is not connected there must be some major wiring changes. I would guess an added fuse panel and a "can" style coil in place of the original coil. Is it 6v or 12v? Positive ground or negative ground?
Attached Images
File Type: jpg Flathead_Electrical_wiring1946-48car.jpg (93.9 KB, 10 views)
JSeery is offline   Reply With Quote
Old 04-28-2020, 07:49 PM   #4
19Fordy
Senior Member
 
19Fordy's Avatar
 
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,877
Default Re: What is this?

Be very careful not to damage it when you remove it.
19Fordy is online now   Reply With Quote
Old 04-28-2020, 07:53 PM   #5
JSeery
Member Emeritus
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
Default Re: What is this?

Quote:
Originally Posted by 19Fordy View Post
Be very careful not to damage it when you remove it.
Yes, would maybe have some value to someone with original wiring. The ballast resistor repos are total junk.
JSeery is offline   Reply With Quote
Old 04-28-2020, 10:01 PM   #6
JayChicago
Senior Member
 
JayChicago's Avatar
 
Join Date: Jan 2019
Location: Chicago
Posts: 711
Default Re: What is this?

Sponsored Links (Register now to hide all advertisements)
re the resistor: Original resistors are available. Those pieces were quite robust, no moving parts, just a big resistor. Most originals still function perfectly well. A few years ago when I thought (wrongly) that I needed one, VanPelt had a stock of them. I would guess that others who deal in original parts do too.
JayChicago is offline   Reply With Quote
Old 04-29-2020, 11:39 AM   #7
Rockbass
Junior Member
 
Rockbass's Avatar
 
Join Date: Aug 2018
Location: Kitchener, Ontario, Canada
Posts: 17
Default Re: What is this?

Thanks for your replies. I took it out and there was in fact no wires attached to it.
I took a picture of where those heavy gauge yellow wires go to. They are attached to a brown rectangular terminal block which is screwed onto the backside of the gauge cluster panel.
Is this an after market solid state circuit breaker?
Attached Images
File Type: jpg 77496161-5084-4F62-A893-20B8F3A2ED3A.jpg (59.6 KB, 290 views)
Rockbass is offline   Reply With Quote
Old 04-29-2020, 02:25 PM   #8
petehoovie
Senior Member
 
petehoovie's Avatar
 
Join Date: May 2015
Posts: 7,933
Default Re: What is this?

Quote:
Originally Posted by Rockbass View Post
Thanks for your replies. I took it out and there was in fact no wires attached to it.
I took a picture of where those heavy gauge yellow wires go to. They are attached to a brown rectangular terminal block which is screwed onto the backside of the gauge cluster panel.
Is this an after market solid state circuit breaker?


What's on the other side of those connections???
__________________
The only thing nice about being imperfect is the joy it brings to others....

"Silver rings, your butt! Them's washers!"
"We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969

https://www.youtube.com/watch?v=7NReUd2_0u0
petehoovie is offline   Reply With Quote
Old 04-29-2020, 11:48 AM   #9
FortyNiner
Senior Member
 
FortyNiner's Avatar
 
Join Date: May 2012
Location: u-rah-rah-Wisconsin
Posts: 1,130
Default Re: What is this?

Does the car with this wiring run?
__________________
19 and 49 F1 - jes' like Henry II built
1946 Deluxe - as Henry built it
FortyNiner is online now   Reply With Quote
Old 04-29-2020, 12:10 PM   #10
Rockbass
Junior Member
 
Rockbass's Avatar
 
Join Date: Aug 2018
Location: Kitchener, Ontario, Canada
Posts: 17
Default Re: What is this?

Yes, it runs just fine with all electrical components okay. It’s original 6 volt positive ground. Just want to know what I’ve got.
Rockbass is offline   Reply With Quote
Old 04-29-2020, 03:00 PM   #11
TJ
Senior Member
 
TJ's Avatar
 
Join Date: May 2010
Location: Napa,California
Posts: 6,007
Default Re: What is this?

I hope there is a fuse in there somewhere.
TJ is offline   Reply With Quote
Old 04-29-2020, 03:37 PM   #12
Ggmac
Senior Member
 
Join Date: Jul 2016
Location: Lake worth Florida
Posts: 1,073
Default Re: What is this?

Why remove it ? How many miles on the car ? How many volts at the coil ?
Ggmac is offline   Reply With Quote
Old 04-29-2020, 04:03 PM   #13
petehoovie
Senior Member
 
petehoovie's Avatar
 
Join Date: May 2015
Posts: 7,933
Default Re: What is this?

Quote:
Originally Posted by Ggmac View Post
Why remove it ? How many miles on the car ? How many volts at the coil ?

It's not wired...It's no longer being used....
__________________
The only thing nice about being imperfect is the joy it brings to others....

"Silver rings, your butt! Them's washers!"
"We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969

https://www.youtube.com/watch?v=7NReUd2_0u0
petehoovie is offline   Reply With Quote
Old 04-29-2020, 09:55 PM   #14
JSeery
Member Emeritus
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
Default Re: What is this?

I've seen that setup before, it is similar to the 48-49 truck wiring. The first photo is labled as a 47. The device shown is the circuit breakers (2) and a resistor is not needed with the can coil.
Attached Images
File Type: jpg Flathead_Electrical_wiring1948-49truck.jpg (95.3 KB, 14 views)
File Type: jpg 1947 Yellow wire to ammeter.jpg (74.3 KB, 198 views)

Last edited by JSeery; 04-29-2020 at 10:03 PM.
JSeery is offline   Reply With Quote
Old 04-29-2020, 10:15 PM   #15
petehoovie
Senior Member
 
petehoovie's Avatar
 
Join Date: May 2015
Posts: 7,933
Default Re: What is this?

Quote:
Originally Posted by JSeery View Post
I've seen that setup before, it is similar to the 48-49 truck wiring. The first photo is labled as a 47. The device shown is the circuit breakers (2) and a resistor is not needed with the can coil.
__________________
The only thing nice about being imperfect is the joy it brings to others....

"Silver rings, your butt! Them's washers!"
"We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969

https://www.youtube.com/watch?v=7NReUd2_0u0
petehoovie is offline   Reply With Quote
Old 04-30-2020, 09:32 AM   #16
WBrown
Junior Member
 
WBrown's Avatar
 
Join Date: Sep 2017
Location: Skiatook, Ok
Posts: 26
Default Re: What is this?

I have the same set up as Rockbass with the resistor attached to the original coil under the hood. The dash set up consists of a junction block with circuit breaker. This is a 6v + ground system, late '47 (Nov) super deluxe 4 door sedan.
Could this be one of Ford's "running changes"!!??
__________________
Aim low--achieve your goals.
WBrown is offline   Reply With Quote
Old 04-30-2020, 09:49 AM   #17
Rockbass
Junior Member
 
Rockbass's Avatar
 
Join Date: Aug 2018
Location: Kitchener, Ontario, Canada
Posts: 17
Default Re: What is this?

JSeery, I think you nailed it, thanks for sharing your knowledge. Wow, what a great resource this Fordbarn forum is. Oh, one more quick question, what is a “can” style coil?
Brian
Rockbass is offline   Reply With Quote
Old 04-30-2020, 11:16 AM   #18
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,106
Default Re: What is this?

Quote:
Originally Posted by Rockbass View Post
JSeery, I think you nailed it, thanks for sharing your knowledge. Wow, what a great resource this Fordbarn forum is. Oh, one more quick question, what is a “can” style coil?
Brian

"Can"-style!


__________________
Click Links Below __


'35-'36 W/8BA & MECHANICAL FAN


T5 W/TORQUE TUBE
V8COOPMAN is offline   Reply With Quote
Old 04-30-2020, 03:31 PM   #19
51 MERC-CT
Senior Member
 
51 MERC-CT's Avatar
 
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
Default Re: What is this?

Or get one with your choice of flavors
Attached Images
File Type: jpg soup can.jpg (22.2 KB, 81 views)
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
51 MERC-CT is offline   Reply With Quote
Old 04-30-2020, 10:01 AM   #20
TJ
Senior Member
 
TJ's Avatar
 
Join Date: May 2010
Location: Napa,California
Posts: 6,007
Default Re: What is this?

The can style coil is the round coil used on the later cars.
TJ is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:19 PM.