Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-26-2020, 06:31 PM   #1
Mac VP
Senior Member
 
Mac VP's Avatar
 
Join Date: May 2010
Location: Cincinnati, OH
Posts: 1,122
Default What happens in a transmission rebuild - Part 3

LINK TO ORIGINAL POST:
https://www.fordbarn.com/forum/showthread.php?t=278347

We picked up the castings this week, and will now be preparing them for paint. I have my casting cleaner dude check for cracks as he handles the clean castings. I do the same when I have them back in the shop. Generally, if there is a crack, it's either in the front bearing opening (usually into one or two of the 4 bolt holes for the bearing retainer)…...or a crack might show up at the outer rim of the bell housing part. We've seen these run through a bolt hole and also over into the inspection window opening. The customer is always notified if we find any cracks and a decision is made mutually as to whether to proceed with the cracked casting or to go with another case. Any other flaws are generally visible at this time, and can also be a reason to reject the casting.

The gearbox castings are masked off for paint. I have plenty of the red plastic cap plugs, and try to close off any openings I can with these. We use aerosol cans of paint with a high heat property for engines, even though the transmissions don't see that sort of temperature. Our standard colors are Antique Ford Green, Antique Ford Blue, and Black. We can spray other colors but might have to rely on the customer to provide special paints.

The day we sprayed was quite mild and sunny......our favorite painting conditions. We usually spray in our large open warehouse room, and place the painted parts out in the sun. This generally gives us time for the first coat to set and then we put a second coat on. These will sit overnight in the heated shop room, and will receive a third coat of paint at the next opportunity.

You will note that the overdrive adapter casting is only color painted on the outside exposed edge. We prefer to keep the contact mating surfaces of the gearbox castings free of extra paint, which can add the gap between the transmission parts.....my constant observations about endplay in the gearset drive this mania in me.

PART 4:
Attached Images
File Type: jpg Merc-ODtrans-Part3-1.jpg (48.3 KB, 153 views)
File Type: jpg Merc-ODtrans-Part3-2.jpg (51.1 KB, 139 views)
File Type: jpg Merc-ODtrans-Part3-4.jpg (62.2 KB, 135 views)
File Type: jpg Merc-ODtrans-Part3-5.jpg (42.5 KB, 132 views)
File Type: jpg Merc-ODtrans-Part3-7.jpg (109.1 KB, 121 views)
File Type: jpg Merc-ODtrans-Part3-9.jpg (40.9 KB, 126 views)
File Type: jpg Merc-ODtrans-Part3-11.jpg (85.7 KB, 124 views)
File Type: jpg Merc-ODtrans-Part3-6.jpg (39.4 KB, 117 views)
File Type: jpg Merc-ODtrans-Part3-8.jpg (96.3 KB, 114 views)
__________________
VANPELT SALES LLC
Cincinnati, Ohio
Office: 513-724-9486
www.vanpeltsales.com
www.classictransmission.com

Last edited by Mac VP; 05-08-2020 at 05:07 PM.
Mac VP is offline   Reply With Quote
Old 03-26-2020, 09:07 PM   #2
JM 35 Sedan
Senior Member
 
JM 35 Sedan's Avatar
 
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,111
Default Re: What happens in a transmission rebuild - Part 3

Great thread Mac! Thank you!

Those cleaned castings look so nice.... I may want to find a shop in my area that has that same cleaning process for castings, and give it a try on my next project.
__________________
John

"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein
JM 35 Sedan is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 03-26-2020, 11:30 PM   #3
RalphM
Senior Member
 
RalphM's Avatar
 
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,503
Default Re: What happens in a transmission rebuild - Part 3

Beautiful work!
Makes me think I better get busy on mine.
RalphM is offline   Reply With Quote
Old 03-27-2020, 12:29 PM   #4
corvette8n
Senior Member
 
corvette8n's Avatar
 
Join Date: Jul 2010
Location: 36 miles north of Albany NY
Posts: 1,957
Default Re: What happens in a transmission rebuild - Part 3

Wow those casting look great when they are clean.
corvette8n is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:29 PM.