Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-14-2012, 06:49 PM   #1
Jim Parker Toronto
Senior Member
 
Jim Parker Toronto's Avatar
 
Join Date: May 2010
Location: Toronto, Ontario, Canada
Posts: 1,289
Default Distributor Cam Screw

Does anyone know what the screw size is that holds the cam on the shaft. I've checked everywhere I can and can't seem to locate the proper size. Thanks in advance, Jim
Jim Parker Toronto is offline   Reply With Quote
Old 04-14-2012, 07:18 PM   #2
dave in australia
Senior Member
 
Join Date: May 2010
Location: Victoria, Australia
Posts: 1,170
Default Re: Distributor Cam Screw

This was discussed awhile ago. It is an odd size unique to the shaft and cam. I can't remember the size but I seem to recall the pitch as 30TPI, also no metric equivelant.
dave in australia is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 04-14-2012, 07:29 PM   #3
Jim Parker Toronto
Senior Member
 
Jim Parker Toronto's Avatar
 
Join Date: May 2010
Location: Toronto, Ontario, Canada
Posts: 1,289
Default Re: Distributor Cam Screw

Quote:
Originally Posted by fordgarage View Post
Original or reproductions? Most of the repros will not fit an original shaft, only a repro shaft.
I guess that we're looking for the repro size.
Jim Parker Toronto is offline   Reply With Quote
Old 04-14-2012, 09:03 PM   #4
RHD
Senior Member
 
RHD's Avatar
 
Join Date: Jan 2011
Location: New Zealand
Posts: 665
Default Re: Distributor Cam Screw

I have just checked. 30 tpi, but it measures 5/16". I have tried all combinations of new screws into old shafts etc and no matter what combination I have they all fit 100% as I suspected.
Another line of thought. Have you ever tried fitting a 30 repro dash lamp cap onto an original base. Just won't go by a minute amount. You would think, whoever made the repro caps would at lease get their measurements right. No way will I ever be buying any more repro caps, that's for sure.
__________________
R.H.D.
Author of Model 'A' Ford technical manuals.
Supplier of good original RHD parts.
RHD is offline   Reply With Quote
Old 04-14-2012, 10:04 PM   #5
Preacher
Senior Member
 
Join Date: May 2010
Location: Minnesota
Posts: 198
Default Re: Distributor Cam Screw

the original thread is .325 -30
__________________
If it ain't broke, fix it 'til it is ...

http://tcmafc.org/
Preacher is offline   Reply With Quote
Old 04-15-2012, 10:08 AM   #6
Jim Parker Toronto
Senior Member
 
Jim Parker Toronto's Avatar
 
Join Date: May 2010
Location: Toronto, Ontario, Canada
Posts: 1,289
Default Re: Distributor Cam Screw

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Preacher View Post
the original thread is .325 -30
Thanks, boy that's really an odd size! I wonder why Henry did it like that? It sure makes it hard to make a distributor puller. Jim
Jim Parker Toronto is offline   Reply With Quote
Old 04-15-2012, 04:19 PM   #7
Bubby Sharp in KY
Member
 
Join Date: May 2010
Location: Gilbertsville KY
Posts: 82
Default Re: Distributor Cam Screw

Jim, See Snyder's page 146 in new catalog for puller stud part # A-12130-DPS $ 13.25 . I made my own , but my buddy Joe used the bought one. If you know someone with a lathe they can make you one.
Bubby Sharp in KY is offline   Reply With Quote
Old 04-16-2012, 08:57 AM   #8
leo
Senior Member
 
leo's Avatar
 
Join Date: May 2010
Location: New Jersey
Posts: 734
Default Re: Distributor Cam Screw

Hey fordgarage, I found your comment most interesting. Are you saying that some reproduction shafts and cam screws are not .325-30? I find that hard to understand because machines which cut threads are very exact. Why would any manufacturer go through the process of making a thread size any different than what it should be?
leo is offline   Reply With Quote
Old 04-16-2012, 10:07 AM   #9
Big John
Senior Member
 
Join Date: May 2010
Posts: 416
Default Re: Distributor Cam Screw

welcome to repro parts world...alot of which is junk...
Big John is offline   Reply With Quote
Old 04-16-2012, 07:31 PM   #10
dave in australia
Senior Member
 
Join Date: May 2010
Location: Victoria, Australia
Posts: 1,170
Default Re: Distributor Cam Screw

Quote:
Originally Posted by leo View Post
Hey fordgarage, I found your comment most interesting. Are you saying that some reproduction shafts and cam screws are not .325-30? I find that hard to understand because machines which cut threads are very exact. Why would any manufacturer go through the process of making a thread size any different than what it should be?
Probably because it is easier to use commercially available cutting tools, which don't list .325-30 as a size. Another possibilty is that when they sized the part to copy, someone had allready hacked it up with the wrong size cutting gear. I have several shafts ruined by a previous owner/mechanic cleaning up the thread with them using a 5/16 32 tpi cutting tool. A lot of replica manufacturers copy a worn out part and the person getting the part replicated does not explain that it is worn and where it needs to be changed to bring it back to original size, so they end up with a new,worn out part.
dave in australia is offline   Reply With Quote
Old 04-16-2012, 09:01 PM   #11
Bill Stipe
Senior Member
 
Bill Stipe's Avatar
 
Join Date: Aug 2010
Location: Auburn, Kentucky
Posts: 194
Default Re: Distributor Cam Screw

I Mfg the dist pullers and stud if your looking for just the stud call SueAnn she can help. If your looking for a tap you would have to have it custom make.

Bill Stipe
__________________
Building Horse Power --
Bill Stipe is offline   Reply With Quote
Old 04-16-2012, 11:22 PM   #12
Jim Parker Toronto
Senior Member
 
Jim Parker Toronto's Avatar
 
Join Date: May 2010
Location: Toronto, Ontario, Canada
Posts: 1,289
Default Re: Distributor Cam Screw

Thanks Bill, just got my order from you last week. Could have shipped them both in the same package! Someone suggested that if I knew someone with a lathe, I could have a screw cut. Two weeks ago got my new to me (1965) Standard Modern lathe moved to its spot in the shop. I advertised the old one (1941 Revitt) and sold it in 5 hours. I cannot cut a 30 TPI on the new lathe, so I checked the old one. Sure enough, as it was going out the door, I checked the data plate, and it would do it! Who says newer is better? Other than that, I do like the newer lathe better....
Jim Parker Toronto is offline   Reply With Quote
Old 04-17-2012, 09:38 AM   #13
JoeWay
Senior Member
 
JoeWay's Avatar
 
Join Date: May 2010
Location: Quincy CA
Posts: 752
Default Re: Distributor Cam Screw

"Commercially available cutting tools" for a job like this would likely be a Geometric-style die head, Swiss screw machine, or CNC lathe, all of which can easily be set up to cut an oversized thread of odd pitch (with 0.325" being an oversize of 5/16").

The major diameter of properly cut threads is usually about 0.005" under nominal, as the crest is truncated to avoid a sharp edge. 0.320" sounds just right to me for a nominal 0.325 thread.

Joe
__________________
1929 Tudor
since 1962
Feather River A's
JoeWay is offline   Reply With Quote
Old 04-17-2012, 10:43 AM   #14
V4F
Senior Member
 
V4F's Avatar
 
Join Date: May 2010
Location: ca.
Posts: 2,522
Default Re: Distributor Cam Screw

get one from a store . get the correct one !! any model a place will have them .
__________________
V4f
V4F is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:10 AM.