|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-21-2019, 09:39 AM | #1 |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,113
|
Brake Drums...WHY Did "INNIES" Become "OUTIES"?
Does anyone know the definitive reason that Ford decided to change the hub's flange location from inside the drum to outside the drum? This is particularly interesting in that the two designs are completely interchangeable, and that Ford didn't usually make changes that cost The Company significant monies just for yuks. DD
EARLY... LATE... |
12-21-2019, 09:59 AM | #2 |
BANNED
Join Date: May 2010
Posts: 3,019
|
Re: Brake Drums...WHY Did "INNIES" Become "OUTIES"?
I have no idea in vs out but I like the looks of the innie much more.
Charlie ny |
Sponsored Links (Register now to hide all advertisements) |
|
12-21-2019, 10:25 AM | #3 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,390
|
Re: Brake Drums...WHY Did "INNIES" Become "OUTIES"?
I would think there was a cost savings involved somewhere along the way. JMO
Paul in CT |
12-21-2019, 10:59 AM | #4 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,943
|
Re: Brake Drums...WHY Did "INNIES" Become "OUTIES"?
Could have been something to do with being the cheapest way to make the wheel mounting surface to surface distance wider to accommodate a wider body without having to redesign the rear end housings, axles, etc?
|
12-21-2019, 11:00 AM | #5 |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,179
|
Re: Brake Drums...WHY Did "INNIES" Become "OUTIES"?
Once the wheel is on, it can't be seen so there has to be a reason. My money is was either cheaper or quicker to outside v. inside.
|
12-21-2019, 12:30 PM | #6 | |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,113
|
Re: Brake Drums...WHY Did "INNIES" Become "OUTIES"?
Sponsored Links (Register now to hide all advertisements)
Quote:
Wheel-mounting surface distance between early and late DID increase, but the rear end housing itself ('42-'48) was about 1-1/2" wider than the '35-'41. The different drums were dimensionally the same when mounted. As far as cost savings, you need to first consider that engineering costs and total re-tooling for the differences ain't cheap. And considering that both had flanges whether seen or hidden, there is essentially no savings in materials used. So...…………….what am I missing? DD |
|
12-21-2019, 12:41 PM | #7 |
Senior Member
Join Date: Oct 2011
Location: Shelton, WA
Posts: 3,800
|
Re: Brake Drums...WHY Did "INNIES" Become "OUTIES"?
Most changed I believe were made to make things cheaper or make things quicker on the assembly line, not to necessarily make them better but some changes probably were for parts that were failing.
|
12-21-2019, 01:10 PM | #8 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,645
|
Re: Brake Drums...WHY Did "INNIES" Become "OUTIES"?
Here's my take:
Improved heat dissipation capability, design resistance to heat warpage in service, and manufacturing quality control.
__________________
Alan |
12-21-2019, 04:10 PM | #9 |
Senior Member
Join Date: Dec 2010
Location: East Coast in CT
Posts: 1,529
|
Re: Brake Drums...WHY Did "INNIES" Become "OUTIES"?
Did it have anything to do with the way a wire wheel would sit on the face of the drum?
Ronnieroadster
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish. "Life Member of the Bonneville 200 MPH Club using a Ford Flathead block" Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline. First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH |
12-21-2019, 05:35 PM | #10 |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,179
|
Re: Brake Drums...WHY Did "INNIES" Become "OUTIES"?
|
12-21-2019, 06:03 PM | #11 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,752
|
Re: Brake Drums...WHY Did "INNIES" Become "OUTIES"?
I doubt that Ford were worried about compatibility with wires by that time. They had been out of production by a few years by then. It's a bit surprising that the wires will go over the 40 drums at all, considering there had been 4 years of wide 5s in the meantime.
The reason for the change may have been that the drums were easier to press out, being a shallower draw. possibly marginally less material, lighter weight (I haven't a clue really) but there must have been a benefit to the change, either financially or quality wise. Mart. |
12-21-2019, 07:06 PM | #12 | |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,179
|
Re: Brake Drums...WHY Did "INNIES" Become "OUTIES"?
Quote:
|
|
12-21-2019, 07:28 PM | #13 |
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
Re: Brake Drums...WHY Did "INNIES" Become "OUTIES"?
I suspect that two engineers got together and said "let's change the design on these" so that some day down the road someone will rack their brain trying to figure out 'why?'
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES |
12-21-2019, 07:32 PM | #14 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
|
Re: Brake Drums...WHY Did "INNIES" Become "OUTIES"?
My guess is that the swaging process for the studs was more efficient when the swage was against the hub disk.
|
12-22-2019, 10:59 AM | #15 |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,179
|
Re: Brake Drums...WHY Did "INNIES" Become "OUTIES"?
|
12-22-2019, 02:22 PM | #16 |
Senior Member
Join Date: May 2010
Location: Boulder, Colorado
Posts: 172
|
Re: Brake Drums...WHY Did "INNIES" Become "OUTIES"?
I believe it is because the inner design had a tendency to chatter/squeal. The scallops on the outer design added considerable stiffness and mitigated the chatter/squeal.
|
12-22-2019, 04:54 PM | #17 |
Senior Member
Join Date: Oct 2019
Location: Carthage , Tennessee
Posts: 199
|
Re: Brake Drums...WHY Did "INNIES" Become "OUTIES"?
I work with a guy that calls it “job justification “.
He says that whenever new engineers or managers are hired,,,they have to change things no matter how good something works. That justifies their being hired,,,no matter how bad it screws up the works. Then after a couple of years,,and the corresponding downturn in productivity,,,they are replaced and a new guy decides to put it back where it was. Immediate increases in productivity,,, and upper management is very proud that the new guys fixed the problem. Sounds crazy I know,,,but I have seen a lot of situations happen just like this. Tommy |
12-23-2019, 01:00 AM | #18 | |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,645
|
Re: Brake Drums...WHY Did "INNIES" Become "OUTIES"?
Quote:
__________________
Alan |
|
12-23-2019, 08:43 AM | #19 |
Senior Member
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,651
|
Re: Brake Drums...WHY Did "INNIES" Become "OUTIES"?
I was in the Army for 23 years, every couple years we would get a new commander, and most of the time Petronius was right.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|