02-19-2020, 10:08 AM | #1 |
Senior Member
Join Date: May 2010
Location: Ashland KY
Posts: 1,159
|
Need a piston
Working on a 38 21 stud engine .060 over 4 ring dome pistons,one has a burned spot in ring gland,,,, have searched the adds and no one has one but did find a set of ring but no piston so thought I would ask here if someone has one stacked away
Pm me if you have one,,,Thanks One other question,oil pump did not have gasket on the plate over gears,have seen them with and without,do I put one on??? I think I’ve always put them on,,
__________________
DON P |
02-19-2020, 10:37 AM | #2 |
Senior Member
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
|
Re: Need a piston
Was a common fix to tighten the axial play on the pumps.
Measure what you have adding a gasket may lower the performance of the pump. |
Sponsored Links (Register now to hide all advertisements) |
|
02-19-2020, 05:11 PM | #3 | |
Senior Member
Join Date: Jul 2016
Location: Lake worth Florida
Posts: 1,073
|
Re: Need a piston
Quote:
|
|
02-19-2020, 06:01 PM | #4 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,140
|
Re: Need a piston
What brand--- I won't be able to look till the weekend--- if there's a single or less than a set it will be Ford, possibly choice of weight too
|
02-19-2020, 08:57 PM | #5 |
Senior Member
Join Date: May 2010
Location: Ashland KY
Posts: 1,159
|
Re: Need a piston
They were all ford pistons 4 ring,,,, domed. Thanks
__________________
DON P |
02-21-2020, 06:48 PM | #6 |
Senior Member
Join Date: Jul 2016
Location: Lake worth Florida
Posts: 1,073
|
Re: Need a piston
Sponsored Links (Register now to hide all advertisements)
|
02-22-2020, 10:49 AM | #7 |
Senior Member
Join Date: May 2010
Location: Ashland KY
Posts: 1,159
|
Re: Need a piston
Bummer,anyone else or have ideas!!!!
__________________
DON P |
02-22-2020, 12:30 PM | #8 |
Senior Member
Join Date: May 2010
Posts: 884
|
Re: Need a piston
I have a piston of the 3 ring design, about a hundred gram difference in weight vs the 4 ring.
|
02-22-2020, 09:37 PM | #9 |
Member
Join Date: Apr 2011
Location: Chelan,Wa.
Posts: 62
|
Re: Need a piston
Will send you a PM about that piston you need. I have several.
|
02-23-2020, 12:06 AM | #10 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,140
|
Re: Need a piston
I don't have any, set of 040,few std, lots of steel pistons--- hadn't looked in that box for a lon time
|
02-23-2020, 12:21 AM | #11 |
Senior Member
Join Date: Nov 2011
Location: Sonoma, CA.
Posts: 1,491
|
Re: Need a piston
You should be able to find one on ebay. I have done so many times.
|
02-23-2020, 07:56 AM | #12 |
Senior Member
Join Date: May 2010
Posts: 2,871
|
Re: Need a piston
You may also check with Fred Wilner at SSO, or Ray Helgers in RI 401 635 4849
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|