02-27-2018, 07:26 PM | #1 |
Senior Member
Join Date: May 2010
Location: Lynden, Wa
Posts: 3,550
|
tube changing
I just need to confirm that I did this correctly. Had a tube that leaked somewhere-not sure where but it did leak. So I popped the outer wall off the rim, pulled the tube and replaced it with another tube. I did not add any cornstarch for lube between the tube and tire. Then I reinflated, seated the tube and popped the sidewall back on the rim. Then fully inflated the tube/tire. Still is holding air. Like I said, I just want to make sure I did this correctly.
Mike
__________________
1930 TownSedan (Briggs) 1957 Country Sedan |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|