Pictures of parts for sale for Hershey

[stangblue]

I have these parts for delivery to Hershey.I have a set of (5) 17" original wire wheels powder coated red never on a car with new Firestone white walls with stainless valve stems new tubes and liners. Real nice original 1934 3:54 rear complete with speedo turtle gear and housing, axles, bells, tranny for 34? This rear is beyond nice. I have another rear 4:11 1934 complete with torque tube and brakes, drums and radius rods. Complete set of brake rods. Intake, starter, and a lot of trinkets. Complete set of new spark wires and looms put together painted real nice, gas repro tank painted epoxy primed chassis black real nice. Spark plugs resistor ends. 33 early 34 rear spring. New 34 front spring painted epoxy primed painted chassis black Will only bring these parts if being purchased. PM for prices. Iam going to posts some pictures of the parts I have for sale will add some more later

[stangblue]

Here are more pictures

[stangblue]

Here are the 4 new never used Firestone with single white wall and a spare lester double white wall used good shape. all rims have been powdercoated red with new tubes and liners with stainless steel valve stems. The spare lester tire rim fell over and has some minor chips but the locking hub will cover them seen in the last picture.

[stangblue]

Will have pictures of springs tomorrow

[stangblue]

Here are 2 springs. ! for the rear of a 1933 and early 34. It's been taken apart and cleaned and epoxy primed each individual leaf and reassembled. The front spring 1933, 1934 has a sprayed chassis painted black for a show finish.

[stangblue]

Sponsored Links (Register now to hide all advertisements)

I will have pictures tomorrow of complete set of front drums and backing pates for a 35 Ford.

[stangblue]

1935-36 Front backing plates with 3 front drums look usable ( measure 12' and a hair over) need cutting) includes what you see.

[stangblue]

Here is a transmission I have with heli-coil gears. Taken apart every thing looks good. I believe it out of a 37 by production #"s. Case has been epoxy primed. I probably won't be bringing everything posted here unless it is needed. My spaces are C40 36-37 Stop by and say hello. I would like to put a face to an avatar and a pen name. Thanks Craig