The Ford Barn

V8COOPMAN · 01-26-2016, 03:10 PM

Would someone with nothing better to do be able to stand an empty 3-speed case on it's nose like in the picture, then stick a tape measure down through the middle hole, and give me the dimension to the upper flat surface (REAR face)? Thank you folks! DD

CA Victoria · 01-26-2016, 03:57 PM

78-7006-5 case - 11.41"

V8COOPMAN · 01-26-2016, 04:13 PM

Don't get no better than that.......THANK YOU much, Tim! DD

Bruce Lancaster · 01-26-2016, 04:27 PM

So...how does that compare with your OD case?

V8COOPMAN · 01-26-2016, 05:08 PM

Quote:

Originally Posted by Bruce Lancaster

So...how does that compare with your OD case?

Not my cases! I just "borrowed" the pic to illustrate the method I needed. I believe the cases belong to HOOP. DD

JM 35 Sedan · 01-26-2016, 08:32 PM

Sponsored Links (Register now to hide all advertisements)

Coopman, let me know if you need measurements on more transmission cases. I have several #48, 78, and side load cases , all gutted out and just sitting and waiting to be tape measured.

01-26-2016, 03:10 PM	#1
V8COOPMAN Senior Member Join Date: May 2010 Location: East Shore of LAKE HOUSTON Posts: 11,106	3-Speed Case Dimension PLEASE? Would someone with nothing better to do be able to stand an empty 3-speed case on it's nose like in the picture, then stick a tape measure down through the middle hole, and give me the dimension to the upper flat surface (REAR face)? Thank you folks! DD __________________ *Click Links Below* __ ▼ *'35-'36 W/8BA & MECHANICAL FAN* *T5 W/TORQUE TUBE*

01-26-2016, 03:57 PM	#2
CA Victoria Senior Member Join Date: Feb 2011 Posts: 2,111	Re: 3-Speed Case Dimension PLEASE? 78-7006-5 case - 11.41" __________________ Tim Downtown, Ca

01-26-2016, 04:13 PM	#3
V8COOPMAN Senior Member Join Date: May 2010 Location: East Shore of LAKE HOUSTON Posts: 11,106	Re: 3-Speed Case Dimension PLEASE? Don't get no better than that.......THANK YOU much, Tim! DD __________________ *Click Links Below* __ ▼ *'35-'36 W/8BA & MECHANICAL FAN* *T5 W/TORQUE TUBE*

01-26-2016, 08:32 PM	#6
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: 3-Speed Case Dimension PLEASE? Sponsored Links (Register now to hide all advertisements) Coopman, let me know if you need measurements on more transmission cases. I have several #48, 78, and side load cases , all gutted out and just sitting and waiting to be tape measured. __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-26-2016, 04:27 PM	#4
Bruce Lancaster Member Emeritus Join Date: May 2010 Location: Madison, NJ Posts: 5,230	Re: 3-Speed Case Dimension PLEASE? So...how does that compare with your OD case?