|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-01-2017, 01:44 PM | #1 |
Junior Member
Join Date: Sep 2013
Location: Nebraska
Posts: 10
|
Unusual Model A Water Pump ID
Hello,
Can anyone help me ID this water pump? It appears to have the same basic dimensions as a stock Model A water pump with the same four mounting holes. It has the following exceptions: - The fan end is much narrower than a stock pump - The grease fitting at the fan end is on top centerline, and not offset. It is also an "oil cup", not a grease fitting (not sure if that was once replaced or not) The front grease fitting is offset like on a stock pump. - There is no packing adjustment nut - The Impeller is different and looks "spring loaded" I tried to attach a couple photos of this pump. Thank you very much. |
01-01-2017, 04:32 PM | #2 |
Senior Member
Join Date: May 2010
Location: Eastern CT
Posts: 2,732
|
Re: Unusual Model A Water Pump ID
Sponsored Links (Register now to hide all advertisements)
|
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|