Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-21-2016, 03:30 PM   #1
k24556
Member
 
Join Date: May 2016
Location: Huntersville NC
Posts: 33
Default cowling that supports the gas tank

OK Need some help. I would like (I think) to take the front cowling off the car; the one that supports the gas tank. The few reference books I have do not mention how to do this, and it looks like there may be some rivets to grind out. Since I am in a no harm mode, i.e., no bolts or rivets were harmed in the filming of this episode....... I thought i would ask the experts.

Body goes to the soda blaster as soon as I get that cowling off.

What is the secret?

Also, engine comes out tomorrow and heads to the machine shop. It is currently 1/8 over, but the cylinders and pistons are in remarkable shape.
Attached Images
File Type: jpg IMG_3403.jpg (68.7 KB, 102 views)
File Type: jpg IMG_3402.jpg (68.9 KB, 92 views)
k24556 is offline   Reply With Quote
Old 05-21-2016, 03:48 PM   #2
700rpm
Senior Member
 
700rpm's Avatar
 
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,892
Default Re: cowling that supports the gas tank

Depending on the severity of the rust, I would not remove the cowl. You are dealing with R & R of rivets, but if your skills include that sort of thing, proceed. You might also ask your blaster if he or she thinks they can get to your areas of concern without rmoving the cowl.
__________________
Ray Horton, Portland, OR


As you go through life, keep your eye on the donut, not the hole.
700rpm is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 05-21-2016, 03:50 PM   #3
700rpm
Senior Member
 
700rpm's Avatar
 
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,892
Default Re: cowling that supports the gas tank

Do you mean your engine is .125 over? That's max. What concerns do you have that you think you need a rebuild?
__________________
Ray Horton, Portland, OR


As you go through life, keep your eye on the donut, not the hole.
700rpm is offline   Reply With Quote
Old 05-21-2016, 04:31 PM   #4
k24556
Member
 
Join Date: May 2016
Location: Huntersville NC
Posts: 33
Default Re: cowling that supports the gas tank

Well regarding the rebuild, it has been sitting for almost 50 years and there is some surface rust on the bores of the cylinders. It is locked up due to probably the oil turning to wax. Basically what I will be doing is freshening up the engine, not really rebuilding. We haven't gotten the crank to turn, so that is next. I think the valves have enough pitting I can see that they will leak by, so that is my thinking.

Regarding the cowl, the welt is in bad shape and needs replacing, that is the main reason to separate the cowl from the body. I guess if we can pry it out that would be better, provided we can get a new welt in
k24556 is offline   Reply With Quote
Old 05-21-2016, 04:33 PM   #5
k24556
Member
 
Join Date: May 2016
Location: Huntersville NC
Posts: 33
Default Re: cowling that supports the gas tank

I got the wrong pic. Here is a pic of the cowl with the tank removed.
Attached Images
File Type: jpg IMG_3404.jpg (64.9 KB, 132 views)
k24556 is offline   Reply With Quote
Old 05-21-2016, 06:40 PM   #6
Roadster62
Senior Member
 
Roadster62's Avatar
 
Join Date: May 2010
Location: Ridgefield, Ct
Posts: 3,439
Default Re: cowling that supports the gas tank

Sponsored Links (Register now to hide all advertisements)
I'd take the cowl off before it goes to be blasted, that way the area were the welting goes will be nice and clean. Installing new welting will be a lot easier when the time comes. Bob
__________________
They don't have to run to be enjoyed. I'm here to enjoy the hobby, and enjoy the cars no matter what they look like. Most of the worlds problems are electrical.
Roadster62 is offline   Reply With Quote
Old 05-21-2016, 06:56 PM   #7
k24556
Member
 
Join Date: May 2016
Location: Huntersville NC
Posts: 33
Default Re: cowling that supports the gas tank

I see a row of 1/4 inch bolts that attach the cowl to the A pillar. It looks like there are 3 or four small rivets that hold the cowl to the rocker area of the A pillar. I'm guessing they need to be cut. Do the larger rivets along the floorboard seam need to be removed too? I just want to remove what is needed to get the cowl off.
k24556 is offline   Reply With Quote
Old 05-21-2016, 07:00 PM   #8
700rpm
Senior Member
 
700rpm's Avatar
 
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,892
Default Re: cowling that supports the gas tank

Quote:
Originally Posted by Roadster62 View Post
I'd take the cowl off before it goes to be blasted, that way the area were the welting goes will be nice and clean. Installing new welting will be a lot easier when the time comes. Bob
Good point.
__________________
Ray Horton, Portland, OR


As you go through life, keep your eye on the donut, not the hole.
700rpm is offline   Reply With Quote
Old 05-22-2016, 12:48 AM   #9
Randy in ca
Senior Member
 
Randy in ca's Avatar
 
Join Date: May 2010
Posts: 1,628
Default Re: cowling that supports the gas tank

It's been awhile since I removed a cowl, but I don't recall there being any rivits that needed to be removed. With the gas tank removed I think there should only be 5 cowl to door pillar bolts to remove, assuming the 3 front body mounting bolts are out. There is one rivet near the 2 bottom most bolts that doesn't need to be removed as it's only holding the side reinforcement to the cowl panel. The very bottom of the cowl assembly slides under the subframe and they are commonly "stuck" together (and possibly a rivet here also - don't recall) - see attached picture. Good luck.
Attached Images
File Type: jpg Model A Cowl Disassembly #5.jpg (85.1 KB, 113 views)

Last edited by Randy in ca; 05-22-2016 at 01:01 AM.
Randy in ca is offline   Reply With Quote
Old 05-22-2016, 02:26 AM   #10
Neil Mylar LakewoodCA
Senior Member
 
Neil Mylar LakewoodCA's Avatar
 
Join Date: May 2010
Location: Lakewood, CA
Posts: 1,338
Default Re: cowling that supports the gas tank

There is one rivet on each side that will need to be removed.
I usually center punch the top of the rivet, then drill down through the top, then use a hammer and chisel to knock off the top of the rivet. Finally, push the lower half of the rivet out of the bottom.
Neil Mylar LakewoodCA is offline   Reply With Quote
Old 05-22-2016, 05:34 AM   #11
k24556
Member
 
Join Date: May 2016
Location: Huntersville NC
Posts: 33
Default Re: cowling that supports the gas tank

Thanks! makes sense. I saw the rivet head, I would guess a 1/4" shank on it.
k24556 is offline   Reply With Quote
Old 05-22-2016, 05:42 PM   #12
Roadster62
Senior Member
 
Roadster62's Avatar
 
Join Date: May 2010
Location: Ridgefield, Ct
Posts: 3,439
Default Re: cowling that supports the gas tank

When everything comes home from the blaster prime it well inside and out. I put a coat of paint on the inside of both sides before the welting goes in. I'm not a "Standards" owner but think the cowl was assembled and the body was painted in one shot at the factory. Bob
__________________
They don't have to run to be enjoyed. I'm here to enjoy the hobby, and enjoy the cars no matter what they look like. Most of the worlds problems are electrical.
Roadster62 is offline   Reply With Quote
Old 05-22-2016, 11:20 PM   #13
ian Simpson
Senior Member
 
Join Date: Apr 2014
Posts: 709
Default Re: cowling that supports the gas tank

Quote:
Originally Posted by Roadster62 View Post
When everything comes home from the blaster prime it well inside and out. I put a coat of paint on the inside of both sides before the welting goes in. I'm not a "Standards" owner but think the cowl was assembled and the body was painted in one shot at the factory. Bob
Our un-rebuilt 28 Tudor was repainted by a previous owner in one shot with the welts installed. From what I have read in several posts, the factories also painted over at least some of the welts.

My problem is that the welts show up very badly, almost white against the dark blue (not a good colour) paint. Any hints for remedy without a rebuild, would be appreciated.
ian Simpson is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:58 AM.