Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-09-2019, 02:13 PM   #1
BillCNC
Senior Member
 
BillCNC's Avatar
 
Join Date: Aug 2017
Location: SoCal Desert
Posts: 426
Question Rebuilt Steering Box Adjustment Question

Hello All,

I rebuilt my steering box a little bit ago and want to further tune out the extra play in the wheel. I'm removing the steering column again because the upper column bushing is rotating, throwing my spark and gas rods out of adjustments once set. I have a 31 and it doesn't require the 2 lil set screws that came with the bushing. Instead mine uses a locater pin system. I'm removing it to see if the pin sheared off.

Anyhow, my question is:

Are the steering box adjustment done with the column off or on the steering shaft?

I guess when I rebuilt the box, I thought I had it dialed in without the column mounted. It took several attempts, but I guess it's still a not right, about 2.5" movement.

Regards
Bill
BillCNC is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:32 AM.