Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-11-2019, 07:33 PM   #1
Digger
Senior Member
 
Digger's Avatar
 
Join Date: May 2010
Location: Pacific Grove, CA
Posts: 721
Default Warning about c&g

I bought a new gas tank for 33-34 (part 40-9002-OR) and was told by them I would need part number 40-9003 to adapt the original sending unit to this new tank. $45 bucks. See page 121 of their catalog.

IT DOES NOT FIT, THE HOLES DO NOT LINE UP! My mechanic shop of over 25 years of working on my cars called them, to be told we didnít know what we are doing. The employee on the phone rude and refused to listen. I spent thousands of dollars on parts, will never spend another penny with them.

Have been told by our local EFV8 parts place that they sold me a Ď35 adapter. Their catalog and part are incorrect.
Digger is offline   Reply With Quote
Old 09-11-2019, 07:48 PM   #2
paul2748
Senior Member
 
paul2748's Avatar
 
Join Date: May 2010
Location: Midland Park, NJ
Posts: 2,507
Default Re: Warning about c&g

Typical of today's customer service. I emailed Rock Auto about sending them a part for repair (they use a third party for the repair). All they did was give me some instructions for their web site that were no good. I complained to them about it, no reply
__________________
48 Ford Conv
56 Tbird
54 Ford Victoria
paul2748 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-11-2019, 08:06 PM   #3
Charlie Stephens
Senior Member
 
Join Date: May 2010
Location: Southern California
Posts: 6,195
Default Re: Warning about c&g

I hope you called them back and asked for a manager. This doesn't sound typical of C&G and the management should know about it. Be sure to let us know what happens.

Charlie Stephens
Charlie Stephens is offline   Reply With Quote
Old 09-11-2019, 08:28 PM   #4
Straightpipes
Senior Member
 
Straightpipes's Avatar
 
Join Date: May 2010
Location: Ballston Spa, NY
Posts: 739
Default Re: Warning about c&g

I like C&G.
Straightpipes is offline   Reply With Quote
Old 09-12-2019, 04:03 PM   #5
philipswanson
Senior Member
 
Join Date: Oct 2015
Location: Bonita, CA
Posts: 913
Default Re: Warning about c&g

Quote:
Originally Posted by Straightpipes View Post
I like C&G.
I don't like C&G and they are in my back yard. Dennis Carpenter is much better. Backorder Bob's is useless.
philipswanson is offline   Reply With Quote
Old 09-20-2019, 07:15 PM   #6
uncle max
Senior Member
 
uncle max's Avatar
 
Join Date: May 2010
Location: SLC Utah
Posts: 736
Default Re: Warning about c&g

Quote:
Originally Posted by Straightpipes View Post
I like C&G.
Me 2!
__________________
RIP Tyler... My Son, Helper & Best Friend.
Feb '78 to Father's Day '10.
www.97-express.com ~ info@97-express.com
uncle max is offline   Reply With Quote
Old 09-11-2019, 08:28 PM   #7
qmdv
Senior Member
 
qmdv's Avatar
 
Join Date: Dec 2012
Location: Nor Cal
Posts: 693
Default Re: Warning about c&g

Have had no problems with C and G. You ended up with a jerk. Every company has a few
qmdv is offline   Reply With Quote
Old 09-11-2019, 08:32 PM   #8
Russ/40
Senior Member
 
Russ/40's Avatar
 
Join Date: May 2010
Location: Santee, California
Posts: 2,953
Default Re: Warning about c&g

This is one of those posts that defies all other experiences.. In fact, having done business with them for over thirty years, I have never heard another complaint like it. I'm flabbergasted. Since your mechanic made the call, can you be sure he didn't imbelish a bit out of frustration? I suggest you call them personally, and ask for Kyle. Whatever happened C&G will make it right.
Russ/40 is offline   Reply With Quote
Old 09-13-2019, 01:25 AM   #9
Graeme / New Zealand
Senior Member
 
Graeme / New Zealand's Avatar
 
Join Date: May 2010
Location: Lower Hutt , New Zealand
Posts: 1,740
Default Re: Warning about c&g

Quote:
Originally Posted by Russ/40 View Post
This is one of those posts that defies all other experiences.. In fact, having done business with them for over thirty years, I have never heard another complaint like it. I'm flabbergasted. Since your mechanic made the call, can you be sure he didn't imbelish a bit out of frustration? I suggest you call them personally, and ask for Kyle. Whatever happened C&G will make it right.
I agree with Russ 100 percent. "Talk to the organ grinder".

GB
__________________
"you can't make honey out of dog sh*t"

"You're a long time looking at the lid"
Graeme / New Zealand is offline   Reply With Quote
Old 09-13-2019, 03:08 AM   #10
Bill S
Senior Member
 
Join Date: May 2010
Location: H.B. So. Calif
Posts: 396
Default Re: Warning about c&g

I have used C&G over the years and had only the best customer service. There is something wrong. Maybe it is the way your mechanic approached them. Talk with Kyle.
Bill S is offline   Reply With Quote
Old 09-13-2019, 05:07 PM   #11
Darrell S
Senior Member
 
Darrell S's Avatar
 
Join Date: Aug 2015
Location: Everett WA
Posts: 237
Default Re: Warning about c&g

Quote:
Originally Posted by Bill S View Post
I have used C&G over the years and had only the best customer service. There is something wrong. Maybe it is the way your mechanic approached them. Talk with Kyle.
Ditto.
Darrell S is offline   Reply With Quote
Old 09-11-2019, 08:38 PM   #12
Digger
Senior Member
 
Digger's Avatar
 
Join Date: May 2010
Location: Pacific Grove, CA
Posts: 721
Default Re: Warning about c&g

It doesn’t fit, it’s the wrong part. It’s a round hole square peg situation. Holes don’t line up, size too large. We wouldn’t call them if it fit, I would be driving the car right now. I will just dispute the charge and move on, venting here got me over it, no need to sweat it any further. Thanks Barners.
Digger is offline   Reply With Quote
Old 09-12-2019, 08:15 AM   #13
Charlie Stephens
Senior Member
 
Join Date: May 2010
Location: Southern California
Posts: 6,195
Default Re: Warning about c&g

Quote:
Originally Posted by Digger View Post
It doesnít fit, itís the wrong part. Itís a round hole square peg situation. Holes donít line up, size too large. We wouldnít call them if it fit, I would be driving the car right now. I will just dispute the charge and move on, venting here got me over it, no need to sweat it any further. Thanks Barners.
Please call them (Kyle?) before you dispute the charge. Once someone in management hears the story they may just send you a check. It sounds like someone is there that shouldn't be and your call will help everyone.

Charlie Stephens
Charlie Stephens is offline   Reply With Quote
Old 09-12-2019, 11:22 AM   #14
Bill
Senior Member
 
Bill's Avatar
 
Join Date: May 2010
Location: Nova Scotia
Posts: 375
Default Re: Warning about c&g

I deal with C&G every year at Wavecrest and always find them obliging. Having said that Diggers mechanic might have suggested to the counterman that he should grab the part #s in question from stock and quickly try to line them up on the counter for proof. Might have saved a pizzin' match. just sayin' Bill
Bill is offline   Reply With Quote
Old 09-12-2019, 02:23 PM   #15
Dunk
Junior Member
 
Join Date: Sep 2019
Location: East Tennessee
Posts: 7
Default Re: Warning about c&g

I started dealing with C&G this year. Every transaction has been excellent. They shipped a few things that didn't fit but were gracious about my returning for full refund and they paid return shipping since it was a vendor problem. Kyle cares and responds immediately to problems. Sorry you had problems. Give them another try.
Dunk is offline   Reply With Quote
Old 09-20-2019, 09:44 PM   #16
Tinker
Senior Member
 
Tinker's Avatar
 
Join Date: May 2010
Location: MN/FL
Posts: 4,958
Default Re: Warning about c&g

Quote:
Originally Posted by Digger View Post
It doesnít fit, itís the wrong part. Itís a round hole square peg situation. Holes donít line up, size too large. We wouldnít call them if it fit, I would be driving the car right now. I will just dispute the charge and move on, venting here got me over it, no need to sweat it any further. Thanks Barners.

Only thing that keeps this going is you if you post. Didn't see this before.
Tinker is offline   Reply With Quote
Old 09-11-2019, 08:41 PM   #17
cas3
Senior Member
 
Join Date: Jan 2011
Location: sw minnesota
Posts: 1,817
Default Re: Warning about c&g

sorry to hear you had some problems, but as others have stated, they are normally quite high on my list of places to do business with. hope you get it sorted out
cas3 is offline   Reply With Quote
Old 09-11-2019, 09:06 PM   #18
51504bat
Senior Member
 
51504bat's Avatar
 
Join Date: Sep 2013
Location: SoCal-Redlands
Posts: 1,177
Default Re: Warning about c&g

Just as an example I recently ordered a headlight switch for my '54 Ranch Wagon from Shoe Box Central. They sent me a Dennis Carpenter switch that was defective. Sent them an email and followed it up with a phone call. They said they would send another switch that day. Point is that even good vendors get bad parts from good suppliers. It's unfortunate but it happens. If the guy at C&G couldn't/wouldn't fix the problem you just have to move up the food chain. I've bought a bunch of parts from C&G and never have had a problem. Given the chance they should make it right. A photo or 2 in an email might help as well. JMO.
__________________
Making the simple complicated for over 30 years.
51504bat is offline   Reply With Quote
Old 09-11-2019, 09:19 PM   #19
Steve Kennedy
Senior Member
 
Steve Kennedy's Avatar
 
Join Date: May 2017
Posts: 205
Default Re: Warning about c&g

For my '36, I had a similar mis-fitment problem with the stainless steel tank I got from Drake. I did get the adapter and no matter which way I turned it, even upside down, it did not fit. I would up redrilling a couple of holes then use a gas resistant Permatex to seal it up.


I also found that the stainless steel tank had two holes, one for the sending unit and one for the internal fuel pump, which I did not purchase, but neither of the holes lined up with where the access opening was in the trunk. You would think they could have checked that when they were making it.
Steve Kennedy is offline   Reply With Quote
Old 09-11-2019, 09:54 PM   #20
uncle max
Senior Member
 
uncle max's Avatar
 
Join Date: May 2010
Location: SLC Utah
Posts: 736
Default Re: Warning about c&g

Quote:
Originally Posted by Steve Kennedy View Post
For my '36, I had a similar mis-fitment problem with the stainless steel tank I got from Drake. I did get the adapter and no matter which way I turned it, even upside down, it did not fit. I would up redrilling a couple of holes then use a gas resistant Permatex to seal it up.


I also found that the stainless steel tank had two holes, one for the sending unit and one for the internal fuel pump, which I did not purchase, but neither of the holes lined up with where the access opening was in the trunk. You would think they could have checked that when they were making it.
^Chinese Checkers!
__________________
RIP Tyler... My Son, Helper & Best Friend.
Feb '78 to Father's Day '10.
www.97-express.com ~ info@97-express.com
uncle max is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:49 PM.