|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-16-2018, 06:07 PM | #1 |
Senior Member
Join Date: Aug 2014
Location: Export, PA (Outside of Pittsburgh)
Posts: 520
|
31 SW vacuun line installation
Can any body give me any hints on how the vacuum line is installed and how it hidden?
Any help would be appreciated. Thanks, |
06-16-2018, 07:06 PM | #2 |
Senior Member
Join Date: Dec 2014
Location: Hillsboro IL
Posts: 480
|
Re: 31 SW vacuun line installation
John, The line come up on the other side (outside) of the dash rail and then the 90 across the top outside of the windshield opening and another 90 to turn and go back thru the header to the inside. There are two clips to hold the line that are attached with the windshield hinge to header screws. The right garnish and the windshield frame hide the line when they are installed.
|
Sponsored Links (Register now to hide all advertisements) |
|
06-16-2018, 07:37 PM | #3 |
Senior Member
Join Date: Aug 2014
Location: Export, PA (Outside of Pittsburgh)
Posts: 520
|
Re: 31 SW vacuun line installation
Thank you Art.
I do not understand where the vacuum line turns back in through the firewall. Mine does not have this opening. How do I make this turn? Thanks, John |
06-18-2018, 08:45 AM | #4 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: 31 SW vacuun line installation
Sponsored Links (Register now to hide all advertisements)
hold your windshield side molding in place, you will notice that there is a little step on the edge of the molding, your vacuum line runs down right under that step. there is room to let the line go down through the corner to the firewall. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|