|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-26-2012, 11:39 AM | #1 |
Senior Member
Join Date: Feb 2012
Location: Yakima, Washington
Posts: 205
|
Light Controls '29
Suggestions please...our center light switch is on for lights but when the wheel is turned, the lights go out until the wheel is back to center. Can't drive it at night like this...can anyone (this is funny, because I know you can and willingly will ) help with suggestions. Thank you all in advance. Kris
__________________
"The Family Ford" |
02-26-2012, 11:56 AM | #2 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Light Controls '29
You have binding in the steering column shaft. You may have to remove the horn rod/light switch and clean the tube, and make sure the horn rod is straight. Make sure the thin brass bushing is at the top of the steering tube and lightly lube the horn rod as you reinstall it.
|
Sponsored Links (Register now to hide all advertisements) |
|
02-26-2012, 04:21 PM | #3 |
Senior Member
Join Date: Feb 2012
Location: Yakima, Washington
Posts: 205
|
Re: Light Controls '29
Thanks Tom...I will get to that as soon as I can...the list is long including honeydo's. Fences, gates for her horses....this brings me back to the member who posted how much time we spend on our hobbies....thanks again..Kris
Is that your train?
__________________
"The Family Ford" |
02-26-2012, 07:47 PM | #4 | |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Light Controls '29
Sponsored Links (Register now to hide all advertisements)
Quote:
Hang on to your horses. The way the gas prices are going we will all need to go back to them and they will become more valuable than Model A's. |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|