|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-27-2017, 05:17 PM | #1 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,526
|
8BA rear main bearing
Does anyone make bearings with an oversize width for an 8BA? I've got 2 Merc cranks that will probably end up with around .010 end play. I know I can have them welded up, but bearings would probably be a less expensive route.
|
03-27-2017, 09:31 PM | #2 |
Senior Member
Join Date: Dec 2010
Location: East Coast in CT
Posts: 1,529
|
Re: 8BA rear main bearing
Have you tried a new set of bearings? I have found the King brand of bearings to be so wide I actually remove material to get end play. Found the same with Clevite it seems to me the bearing engineers have taken into acount the bearings are being used on worn cranks so extra material has been added to heip.
Ron |
Sponsored Links (Register now to hide all advertisements) |
|
03-27-2017, 09:41 PM | #3 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,526
|
Re: 8BA rear main bearing
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|