|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-11-2017, 12:18 PM | #1 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,526
|
36 roadster rear fender
Can someone give me the location of the step pad on the rear fender of a 1936 roadster? Also what hardware is used to fasten it in place. Thanks, Jack
|
06-11-2017, 04:20 PM | #2 |
Senior Member
Join Date: Apr 2013
Location: Virginia Beach, VA
Posts: 345
|
Re: 36 roadster rear fender
Here are a couple pictures that might help. The pad is fastened with a square nut that is rounded in the top to match the inside curve of the fender. Hope this helps.
Sent from my iPad using Tapatalk |
Sponsored Links (Register now to hide all advertisements) |
|
06-11-2017, 09:49 PM | #3 |
Senior Member
Join Date: May 2010
Location: Wildwood, MO. (near St. Louis)
Posts: 1,792
|
Re: 36 roadster rear fender
Jack, Here re two images that should help with your roadster step pad. Even though the one sketch is of a 35 rear fender, the dimensions and references should be the same. If you need more information you can contact me at [email protected].
|
06-12-2017, 01:36 PM | #4 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,526
|
Re: 36 roadster rear fender
Thanks for the help guys. That's what I needed to know.
|
06-12-2017, 06:00 PM | #5 |
Junior Member
Join Date: Dec 2014
Location: Central Wisconsin
Posts: 22
|
Re: 36 roadster rear fender
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|