Go Back   The Ford Barn > General Discussion > Late V8 (1954+)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 12-29-2013, 09:25 PM   #1
richard_brust
Junior Member
 
Join Date: Dec 2013
Location: El Dorado Hills, CA
Posts: 1
Default Oil Pan Gasket replace - other maint while off?

Changing oil pan gasket, along with all the other related gaskets/seals - oil pump, inlet tube(s)...

While this is off, is there anything else that's recommended? Below is what the internals look like, so any other comments on the condition of what the pics show is also very welcome. Thanks...





richard_brust is offline   Reply With Quote
Old 12-30-2013, 01:45 AM   #2
Y-Blockhead
Senior Member
 
Y-Blockhead's Avatar
 
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
Default Re: Oil Pan Gasket replace - other maint while off?

Sponsored Links (Register now to hide all advertisements)
Richard, the only thing that comes to mind is to remind you to put sealant on the pan bolts/studs that go into the rear main seal retainer as these bolt holes are open to the crank case and can be a source for a mysterious leak because of oil seeping down the bolt threads.

I also like to fill the holes where the rear main seal bolts are with silicone for the reasons mentioned above.
Y-Blockhead is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:32 PM.