The Ford Barn

stomperz71 · 01-09-2020, 12:49 PM

Long time reader first time poster. Great forum by the way.

Would anyone happen to have a PDF copy of the attached picture, F-1B Article. The pictures I have are just to blurry to read. Thanks in advance.

F1B Article 004.jpg

Flathead · 01-09-2020, 01:37 PM

Is that the article that was in Skinned Knuckles magazine a number of years ago?

Gary WA · 01-09-2020, 01:48 PM

Quote:

Originally Posted by Flathead

Is that the article that was in Skinned Knuckles magazine a number of years ago?

Aug 1985 pg4 Skinned knuckles?

stomperz71 · 01-09-2020, 02:06 PM

Quote:

Originally Posted by Flathead

Is that the article that was in Skinned Knuckles magazine a number of years ago?

Yes I believe it is. Ron posted pictures a few years back but not good enough pics to read. Was wondering if anybody had a copy of the article. I think it was 3-4 pages long. Is Ron around this forum any more?

stomperz71 · 01-10-2020, 07:59 AM

Was really hoping somebody was going to have a copy of this article. Well anyways for guys that have rebuilt the F-1B carb where do you set the float at?

Gary WA · 01-10-2020, 11:23 AM

Sponsored Links (Register now to hide all advertisements)

Email he can help you out for the correct answerSite Index (Model-A.org)

Bob C · 01-10-2020, 12:04 PM

Looks like you can get the magazine here. https://backissues.com/issue/Skinned...es-August-1985

Bob

stomperz71 · 01-10-2020, 12:22 PM

Quote:

Originally Posted by Bob C

Looks like you can get the magazine here. https://backissues.com/issue/Skinned...es-August-1985

Bob

No kidding, Learn something new everyday. Thanks

stomperz71 · 01-10-2020, 12:43 PM

When i get a copy of it I'll try to scan it and post a copy of it here.

katy · 01-10-2020, 01:42 PM

Quote:

Originally Posted by stomperz71

When i get a copy of it I'll try to scan it and post a copy of it here.

Thanks

Flathead · 01-10-2020, 04:16 PM

It is Skinned Knuckles from October 1985 the F1B article is mentioned on the front cover of the magazine. I am looking at it right now, but am not good at computer stuff to post it.
My mag definitely is October NOT August as was previously mentioned.

160B · 01-10-2020, 04:50 PM

Skinned Knuckles October 1985

https://backissues.com/issue/Skinned...s-October-1985

stomperz71 · 01-10-2020, 04:55 PM

Copy that, I'll get one ordered. Thanks

stomperz71 · 01-16-2020, 06:17 PM

Scan0004.pdf

Scan0005.pdf

Scan0006.pdf

Here ya go gents, enjoy.

katy · 01-17-2020, 12:02 PM

In the August 1985 issue of Skinned Knuckles there was a similar article about the Tillotson X.
Here ya go:

01-09-2020, 12:49 PM	#1
stomperz71 Junior Member Join Date: Dec 2019 Posts: 16	Tillotson F-1B Caburator Long time reader first time poster. Great forum by the way. Would anyone happen to have a PDF copy of the attached picture, F-1B Article. The pictures I have are just to blurry to read. Thanks in advance. F1B Article 004.jpg

01-09-2020, 01:37 PM	#2
Flathead Senior Member Join Date: May 2010 Location: Southern Maine Posts: 1,498	Re: Tillotson F-1B Caburator Is that the article that was in Skinned Knuckles magazine a number of years ago?

01-10-2020, 07:59 AM	#5
stomperz71 Junior Member Join Date: Dec 2019 Posts: 16	Re: Tillotson F-1B Caburator Was really hoping somebody was going to have a copy of this article. Well anyways for guys that have rebuilt the F-1B carb where do you set the float at?

01-10-2020, 11:23 AM	#6
Gary WA Senior Member Join Date: May 2010 Location: Clinton,WA/Whidbey Island Posts: 4,104	Re: Tillotson F-1B Caburator Sponsored Links (Register now to hide all advertisements) Email he can help you out for the correct answerSite Index (Model-A.org) __________________ www.whidbeymodelaclub.com Last edited by Gary WA; 01-10-2020 at 11:29 AM.

01-10-2020, 12:04 PM	#7
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 8,747	Re: Tillotson F-1B Caburator Looks like you can get the magazine here. https://backissues.com/issue/Skinned...es-August-1985 Bob

01-10-2020, 12:43 PM	#9
stomperz71 Junior Member Join Date: Dec 2019 Posts: 16	Re: Tillotson F-1B Caburator When i get a copy of it I'll try to scan it and post a copy of it here.

01-10-2020, 04:16 PM	#11
Flathead Senior Member Join Date: May 2010 Location: Southern Maine Posts: 1,498	Re: Tillotson F-1B Caburator It is Skinned Knuckles from October 1985 the F1B article is mentioned on the front cover of the magazine. I am looking at it right now, but am not good at computer stuff to post it. My mag definitely is October NOT August as was previously mentioned.

01-10-2020, 04:50 PM	#12
160B Senior Member Join Date: Aug 2010 Location: Port Orchard, WA Posts: 1,498	Re: Tillotson F-1B Caburator Skinned Knuckles October 1985 https://backissues.com/issue/Skinned...s-October-1985 __________________ 1931 160B & 1931 68B If you don't have time to do it right the 1st time, how do you have time to do it the 2nd time?

01-10-2020, 04:55 PM	#13
stomperz71 Junior Member Join Date: Dec 2019 Posts: 16	Re: Tillotson F-1B Caburator Copy that, I'll get one ordered. Thanks

01-16-2020, 06:17 PM	#14
stomperz71 Junior Member Join Date: Dec 2019 Posts: 16	Re: Tillotson F-1B Caburator Scan0004.pdf Scan0005.pdf Scan0006.pdf Here ya go gents, enjoy.