The Ford Barn

JRrev · 11-30-2018, 11:34 AM

This is a mock-up I made for a club after-meeting program to describe engine timing. So many could not understand which contact was for the #1 spark plug. One of the popular books' explanation was the rotor pointing "opposite" #1 contact so a lot of members were wrongly interpreting that to mean 180 degrees. Also, used for point gap, etc. The distributor is rebuilt. If made today with Snyder's parts, the total would be over $300 not including the mock-up of course. $185 plus shipping. Reduced to $175.

Note: After using this for a after-meeting or weekend club program, you could take the parts and use them!

JRrev · 01-16-2019, 09:28 AM

btt

JRrev · 03-18-2019, 10:17 PM

btt

JRrev · 03-30-2019, 06:36 PM

Reduced again to $165!

JRrev · 04-14-2019, 08:17 AM

Reduced to $155.

JRrev · 05-03-2019, 10:01 AM

Sponsored Links (Register now to hide all advertisements)

Reduced to $145.

JRrev · 09-29-2019, 10:19 AM

Unavailable.

01-16-2019, 09:28 AM	#2
JRrev Senior Member Join Date: Jan 2018 Location: Frenchtown Township, MI Posts: 959	Re: Demonstrator For Timing Seminar btt

03-18-2019, 10:17 PM	#3
JRrev Senior Member Join Date: Jan 2018 Location: Frenchtown Township, MI Posts: 959	Re: Demonstrator For Timing Seminar btt

03-30-2019, 06:36 PM	#4
JRrev Senior Member Join Date: Jan 2018 Location: Frenchtown Township, MI Posts: 959	Re: Demonstrator For Timing Seminar Reduced again to $165!

04-14-2019, 08:17 AM	#5
JRrev Senior Member Join Date: Jan 2018 Location: Frenchtown Township, MI Posts: 959	Re: Demonstrator For Timing Seminar Reduced to $155.

05-03-2019, 10:01 AM	#6
JRrev Senior Member Join Date: Jan 2018 Location: Frenchtown Township, MI Posts: 959	Re: Demonstrator For Timing Seminar Sponsored Links (Register now to hide all advertisements) Reduced to $145.

09-29-2019, 10:19 AM	#7
JRrev Senior Member Join Date: Jan 2018 Location: Frenchtown Township, MI Posts: 959	Re: Demonstrator For Timing Seminar Unavailable. Last edited by JRrev; 10-13-2019 at 10:03 AM.