|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-20-2015, 04:48 PM | #1 |
Senior Member
Join Date: Oct 2012
Location: morrisburg ontario
Posts: 349
|
need advice on float a motor mounts install
okay all is in place and have snugged mounts that I can still turn
bolts with wrench. do not want to over tighten so how tight should I go. did not use a torque wrench but guessing I got about 10 lbs on them ?/ thanks in advance fred The. Rubber donuts I'm talking about Last edited by fredski; 04-20-2015 at 05:40 PM. |
04-20-2015, 10:31 PM | #2 |
Senior Member
Join Date: Jan 2014
Location: N Illinois
Posts: 447
|
Re: need advice on float a motor mounts install
You want the sandwiched donut to just begin to bulge. (I put a light behind them to watch the sides for a little plumping)
|
Sponsored Links (Register now to hide all advertisements) |
|
04-20-2015, 10:58 PM | #3 |
Senior Member
Join Date: Sep 2014
Location: oroville calif
Posts: 893
|
Re: need advice on float a motor mounts install
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|