where to buy exhaust and intake manifold

[fredski]

I hope not to have to machine if I buy separate .

usually deal with snyders sometimes brattons.


fredski any gasket recommendation ?

[C26Pinelake]

You can't go wrong with Allen and Bob at A & L.
Wayne

[Mitch//pa]

fred the suppliers sell the same product, with that being said for a few extra $$ snyders came out with a ceramic coated exhaust manifold which i highly recommend. you wont have to machine 2 new manifolds and will be good to go. i think others are carrying the ceramic ones now supplied to them by snyder

[JohnLaVoy]

I like Snyder's exhaust manifold.

[fredski]

Originally Posted by Mitch//pa

fred the suppliers sell the same product, with that being said for a few extra $$ snyders came out with a ceramic coated exhaust manifold which i highly recommend. you wont have to machine 2 new manifolds and will be good to go. i think others are carrying the ceramic ones now supplied to them by snyder

thanks for advice , will go ceramic .
if my kids are reading this its only a little less inhertence.

fredski the old man

[fredski]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Mitch//pa

fred the suppliers sell the same product, with that being said for a few extra $$ snyders came out with a ceramic coated exhaust manifold which i highly recommend. you wont have to machine 2 new manifolds and will be good to go. i think others are carrying the ceramic ones now supplied to them by snyder

I checked out your snyders thumbnails , but it comes separate from
intake manifold. so if I buy new intake it will not need machine work
to match with exhaust manifold/?

fred

[Barber31]

I can't remember which big supplier I bought from but it was a kit with both already together. Kit saved me a couple bucks. I think it was mikes a-affordable

[Mitch//pa]

Originally Posted by fredski

I checked out your snyders thumbnails , but it comes separate from
intake manifold. so if I buy new intake it will not need machine work
to match with exhaust manifold/?

fred

no machining required

[fredski]

Originally Posted by Mitch//pa

no machining required

thanks will order parts. your very helpful.