The Ford Barn

Bassman/NZ · 04-01-2011, 04:31 PM

Hi, I removed the oil pan off my C59A to repair a small leak, and did not mark the bolts. Now I discover two of the bolts are slightly longer, and have a shoulder. I am assuming these two go either side at the front of the pan. Can anyone say yay or nay to this assumption? Thanks, Marty.

OhioRick · 04-01-2011, 04:39 PM

Sponsored Links (Register now to hide all advertisements)

Just reinstalled my 59A pan a few weeks ago and I remember longer length bolts to the rear of the pan not the front.

04-01-2011, 04:31 PM	#1
Bassman/NZ Senior Member Join Date: May 2010 Location: Napier, New Zealand Posts: 2,001	Oil pan bolts. Hi, I removed the oil pan off my C59A to repair a small leak, and did not mark the bolts. Now I discover two of the bolts are slightly longer, and have a shoulder. I am assuming these two go either side at the front of the pan. Can anyone say yay or nay to this assumption? Thanks, Marty.

04-01-2011, 04:39 PM	#2
OhioRick Senior Member Join Date: May 2010 Location: Ohio Posts: 174	Re: Oil pan bolts. Sponsored Links (Register now to hide all advertisements) Just reinstalled my 59A pan a few weeks ago and I remember longer length bolts to the rear of the pan not the front.